Announcement

Collapse
No announcement yet.

Zotac 1660 ti Shorted

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Zotac 1660 ti Shorted

    Hi all,

    I just got that 1660 that someone shorted by touching a metal plate to the back of the card.

    I found that U15 (ALNB 9614) has a hole in it. Any idea what that is so I can buy a replacement?

    Also, all these caps in the photo measure 0.2ohm which I suppose is short, as this is what my multimeter measures ground to ground as well. Measurement taken after taking off the burned IC.

    PN 9288-3n527-201z8
    board id 23a-DN527-101AF
    Attached Files
    Last edited by alekk89; 09-25-2021, 08:18 AM.

    #2
    Re: Zotac 1660 ti Shorted

    You can just about see the AO logo at the top left corner,its an Alpha Omega OZ2261NQI

    Datasheet - https://cdn.badcaps-static.com/pdfs/...db75a86549.pdf

    0.2ohms is short,maybe a shorted cap somewhere
    Attached Files
    All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

    Comment


      #3
      Re: Zotac 1660 ti Shorted

      Thank you for that!

      All 3 marked locations are shorted, should I assume that's short to the vcore?
      Can I inject 1 volt in on any of the 3?

      Update:
      Injecting 1v gives 6a and warm GPU
      Attached Files
      Last edited by alekk89; 09-25-2021, 09:54 AM.

      Comment

      Working...
      X