Can anyone share the usb rom files from this programmer?
-
-
Re: BY-U301 software and usb rom files requested
They are coming. One of the other techs on this forum has the tool on order and will share the ROM files upon arrival. -
-
Re: BY-U301 software and usb rom files requested
Machine: Macbook Pro 2017 13" A1708
Board number: 820-00840-A
IC: U2890Comment
-
Re: BY-U301 software and usb rom files requested
Machine: Macbook Air 2019 A1932
Board number: 820-01521
IC: U2890Comment
-
Re: BY-U301 software and usb rom files requested
Machine: Macbook Pro 15" 2018 A1990
Board number: 820-01041-A
IC: U2890 + UB090Comment
-
Re: BY-U301 software and usb rom files requested
Many thanks for the posted dumps.
Could we trouble you to post the other USB rom dumps from the BY-U301 tool for a complete collection?Comment
-
Re: BY-U301 software and usb rom files requested
A2179
820-01958Comment
-
Re: BY-U301 software and usb rom files requested
A2141
820-01700Comment
-
Re: BY-U301 software and usb rom files requested
Hello guys, do have somebody 820-02020 ROM file please?Comment
-
Re: BY-U301 software and usb rom files requested
Hi,
T2 Rom file, for A1989 820-00850-A? Anyone?Comment
-
Re: BY-U301 software and usb rom files requested
A2251 rom files, anyone got please?.Comment
-
Re: BY-U301 software and usb rom files requested
All there.Comment
-
Re: BY-U301 software and usb rom files requested
Hi Sir, thank you so much for the files. So great of you.Comment
-
Greetings badcaps community,
I havent done this for a long time and want to start it all again, after some evil and annyoing illness.
So I apologize in advance, if some phrases might sound a bit like gibberish or illogical to you.
Im trying my best to fully describe what I plan to achieve and hope I was choosing the right sub-forum for my new adventure.
I have a Elitebook 820 G1 and a Elitebook 840 G2 here.
These ask for a password when entering the BIOS, but boot just fine from the internal SSD.
I learned that desoldering...10-29-2024, 06:03 AM -
Hi has anyone got the latest software for the TL866CS MiniPro EPROM programmer version 03.2.86 is installed now i have tried the update site in the programmer software but it wont connect to their website i am running windows 10
Edit found this site programmer works now http://www.xgecu.com/EN/Index.html -
Hi guys ,I'm looking for software related with this rare bios programmer.There is no any official site providing SW for that old board. Practically is (new) unused and unusable in that state without software
. Hope anybody know any info/software about it. Thanks in advance
... -
Adding chip support is quite easy,there`s even some instructions included with NeoProgrammer,although its not obvious where they are
and once you do find them there`s a few crucial steps missing.
Extract chiplist.zip to a folder,the instructions are in Import_EN.txt and in Import.xml .Its the xml file where we add the new chip.
Open Import.xml with notepad or any other text editor.In this example i`m adding a Macronix MX77L25650F SPI_NOR chip.
After adding the chip save the xml file and copy it to the root directory of the... -
Dear friends, I want to share my experience repairing an ASUS TUF FX506L gaming laptop motherboard: DABKXDMB8E0_F_BKXD. Boardview and schematic are available, as well as the BIOS and ITE ROM.
When the customer brought in this laptop, it was initially dead; it showed no signs of booting for any reason. After hours of measurements, checking each stage, MOSFET, and seeing if there was a short circuit in any capacitor, I discovered a strange 0.7V leakage voltage on the 3V_S5 rail, particularly on the PL9 coil, with the board not powered on. There were 3V_LDO and 5V_LDO voltages, which...
Comment