Hello, I have an HP Elitebook 850 G5 with a bios password
I wrote the two memoirs I wrote the two memoirs with the dumps posted
but I have many errors
Sistem is booting in manufacturing program mode and the laptop starts up very hard
I also solved errors with the HP MANUFACTURE PROGRAMMING MPM application
there are two left SISTEM BOARD 00A FEATURE BITE and FACTORY HOST BASED MAC ADRESS
I also post the 2 original saved dumps
Hello, I have an HP Elitebook 850 G5 with a bios password
I wrote the two memoirs I wrote the two memoirs with the dumps posted
but I have many errors
Sistem is booting in manufacturing program mode and the laptop starts up very hard
I also solved errors with the HP MANUFACTURE PROGRAMMING MPM application
there are two left SISTEM BOARD 00A FEATURE BITE and FACTORY HOST BASED MAC ADRESS
I also post the 2 original saved dumps
File & instructions sent.
Test & leave feedback.
---------------------------------------------------------------------------------------------------------------------------------------------------------- All donations to Badcaps are welcome. Become a Badcaps supporter >>>>>click on this link to donate <<<<< Thanks to all supporters.​ ----------------------------------------------------------------------------------------------------------------------------------------------------------
Hello !!
I wrote the two memoirs and everything works fine !!!
Thank you very much for your help
Good for you. You did a good job too.
Bravissimo
---------------------------------------------------------------------------------------------------------------------------------------------------------- All donations to Badcaps are welcome. Become a Badcaps supporter >>>>>click on this link to donate <<<<< Thanks to all supporters.​ ----------------------------------------------------------------------------------------------------------------------------------------------------------
Thank you for your reply and for your interest, before proceeding as you indicated, I forgot to mention that the password is in the Power-On Authentication, so the procedure you gave me, is it okay to unlock? or is there other procedure?
Thanks again
Thank you for your reply and for your interest, before proceeding as you indicated, I forgot to mention that the password is in the Power-On Authentication, so the procedure you gave me, is it okay to unlock? or is there other procedure?
Thanks again
post the 16MB bios here..
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
Hello! I would like to request the HP 850 G5 password to be deleted. I used RcUnlocker, but I couldn't remove the password (what could I have done wrong?) Thank you for your help!
Hello! I would like to request the HP 850 G5 password to be deleted. I used RcUnlocker, but I couldn't remove the password (what could I have done wrong?) Thank you for your help!
Thanks for the help, but unfortunately it doesn't work, the computer starts like a backup of the bios and then says "Security Device Problem" I click on "OK" and it takes me back to the "Power-On Authentication" screen where it asks me to put the password.
Maybe it's my fault, because the dump I uploaded was not good, as I compared it with the other dumps and it was not the same, so I submit a new dump which I am sure is good as I did 3 new readings and they are all 3 identical.
P.S. I use a CH341A because EZP2019 + does not recognize me the 25q128jv.
What software version do you recommend for the CH341A?
Thank you
Thanks for the help, but unfortunately it doesn't work, the computer starts like a backup of the bios and then says "Security Device Problem" I click on "OK" and it takes me back to the "Power-On Authentication" screen where it asks me to put the password.
Maybe it's my fault, because the dump I uploaded was not good, as I compared it with the other dumps and it was not the same, so I submit a new dump which I am sure is good as I did 3 new readings and they are all 3 identical.
P.S. I use a CH341A because EZP2019 + does not recognize me the 25q128jv.
What software version do you recommend for the CH341A?
Thank you
Comment