Announcement

Collapse
No announcement yet.

W25Q128JVPQ HP BIOS Read Help

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    W25Q128JVPQ HP BIOS Read Help

    Hello everyone. I have two Winbond chip: 25Q64JVIQ and 25Q128JVPQ. Please tell me, how can I read them? Is any adapter for programmer? I have programmer TL866CS with SOP8 socket, but I'm afraid it is not compatible. Photo of chip in attachment. Thank you.
    Attached Files

    #2
    Re: W25Q128JVPQ HP BIOS Read Help

    The chips are WSON8 ,you would need an adapter if you desoldered them.You can also get WSON8 and sop8 pogo pin clips.You can solder wires to the empty sop8 pads as well. The 2 bios chips aren`t supported by the TL866CS ,the latest TL866II does.The only way around it, if its the only progrmmer you own,is to find a cross compatible bios chip from another maker and check if its in the TL866CS support list, then program it as that.

    https://www.gigadevice.com/products/...e-search-tool/
    https://www.macronix.com/en-us/produ...ce-search.aspx
    https://www.micron.com/support/tools...reference-tool

    .
    Last edited by SMDFlea; 07-13-2020, 03:46 PM.
    All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

    Comment


      #3
      Re: W25Q128JVPQ HP BIOS Read Help

      Thank you for reply. I would like to buy TL866II Plus programmer with adapter, which photo is in attachment. Will it be compatible?
      Attached Files

      Comment


        #4
        Re: W25Q128JVPQ HP BIOS Read Help

        The TL866II is a good programmer,i have the old TL866CS too.Yes that adapter is ok, you can buy it seperately at aliexpress,ebay very cheap.
        All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

        Comment


          #5
          Re: W25Q128JVPQ HP BIOS Read Help

          Okay, thank you very much for your help.

          Comment

          Working...
          X