Badcaps.net Forum
Go Back   Badcaps Forums > Troubleshooting Hardware & Devices and Electronics Theory > Troubleshooting Power Supplies and Power Supply Design
Register FAQ Calendar Search Today's Posts Mark Forums Read

 
Thread Tools Display Modes
Old 10-31-2021, 07:18 AM   #1
Alexbp
Member
 
Join Date: Aug 2021
City & State: Siegburg
My Country: Germany
I'm a: Knowledge Seeker
Posts: 41
Default I need a charger schematic YLT6722000

I need a schematic of the charger
model: YLT6722000
input: AC100-240V~ 50/60Hz
output: DC67.2V 2.0A
Alexbp is offline   Reply With Quote
Old 10-31-2021, 10:21 AM   #2
sam_sam_sam
Badcaps Veteran
 
Join Date: Jul 2011
City & State: Some times Sunny Jacksonville FL
My Country: USA
Line Voltage: 120 Volts 60 HZ
I'm a: Knowledge Seeker
Posts: 3,475
Default Re: I need a charger schematic YLT6722000

Please post some pictures of this battery charger board front and back of the board we might be able to help you with it

Please decried what is the issue with and what you have done so far
__________________
9 PC LCD Monitor
6 LCD Flat Screen TV
30 Desk Top Switching Power Supply
10 Battery Charger Switching Power Supply for Power Tool
6 18v Lithium Battery Power Boards for Tool Battery Packs
1 XBox 360 Switching Power Supply and M Board
25 Servo Drives 220/460 3 Phase
6 De-soldering Station Switching Power Supply 1 Power Supply
1 Dell Mother Board
15 Computer Power Supply
1 HP Printer Supply & Control Board * lighting finished it *


These two repairs where found with a ESR meter...> Temp at 50*F then at 90*F the ESR reading more than 10%

1 Over Head Crane Current Sensing Board ( VFD Failure Five Years Later )
2 Hem Saw Computer Stack Board

All of these had CAPs POOF
All of the mosfet that are taken out by bad caps

Last edited by sam_sam_sam; 10-31-2021 at 10:23 AM..
sam_sam_sam is offline   Reply With Quote
Old 10-31-2021, 03:27 PM   #3
Alexbp
Member
 
Join Date: Aug 2021
City & State: Siegburg
My Country: Germany
I'm a: Knowledge Seeker
Posts: 41
Default Re: I need a charger schematic YLT6722000

top and bottom view
Attached Images
File Type: jpg 2021_10_31_22_09_IMG_6790.jpg (545.7 KB, 31 views)
File Type: jpg 2021_10_31_22_10_IMG_6791.jpg (750.8 KB, 31 views)
Alexbp is offline   Reply With Quote
Old 10-31-2021, 05:16 PM   #4
diif
Badcaps Veteran
 
Join Date: Feb 2014
City & State: Midlands
My Country: England
I'm a: Professional Tech
Posts: 6,007
Default Re: I need a charger schematic YLT6722000

What's up with it ?
diif is online now   Reply With Quote
Old 11-01-2021, 01:48 AM   #5
Alexbp
Member
 
Join Date: Aug 2021
City & State: Siegburg
My Country: Germany
I'm a: Knowledge Seeker
Posts: 41
Default Re: I need a charger schematic YLT6722000

D3 diode was short-circuited and on U3 the supply resistance is 109 ohms
LED was always green
Attached Images
File Type: jpg 2021_11_01_08_35_IMG_6792.jpg (465.0 KB, 17 views)
File Type: jpg 2021_11_01_08_36_IMG_6794.jpg (807.8 KB, 16 views)
Alexbp is offline   Reply With Quote
Old 11-01-2021, 03:54 AM   #6
Alexbp
Member
 
Join Date: Aug 2021
City & State: Siegburg
My Country: Germany
I'm a: Knowledge Seeker
Posts: 41
Default Re: I need a charger schematic YLT6722000

I have a question, can I replace D3 FR207 with 1N5407?
Alexbp is offline   Reply With Quote
Old 11-01-2021, 10:05 AM   #7
eccerr0r
Solder Sloth
 
eccerr0r's Avatar
 
Join Date: Nov 2012
City & State: CO
My Country: USA
Line Voltage: 120VAC 60Hz
I'm a: Hobbyist Tech
Posts: 7,089
Default Re: I need a charger schematic YLT6722000

No, unless if you want to replace the 1N5407 again.
eccerr0r is offline   Reply With Quote
Old 11-01-2021, 12:23 PM   #8
Alexbp
Member
 
Join Date: Aug 2021
City & State: Siegburg
My Country: Germany
I'm a: Knowledge Seeker
Posts: 41
Default Re: I need a charger schematic YLT6722000

Thank you very much
Alexbp is offline   Reply With Quote
Old 11-04-2021, 10:01 AM   #9
Alexbp
Member
 
Join Date: Aug 2021
City & State: Siegburg
My Country: Germany
I'm a: Knowledge Seeker
Posts: 41
Default Re: I need a charger schematic YLT6722000

replaced the diode fr207 and u3 LM358, the battery charges after 5 minutes of shorting the diode and LM358.
exactly as it was
Alexbp is offline   Reply With Quote
Old 11-04-2021, 10:43 AM   #10
eccerr0r
Solder Sloth
 
eccerr0r's Avatar
 
Join Date: Nov 2012
City & State: CO
My Country: USA
Line Voltage: 120VAC 60Hz
I'm a: Hobbyist Tech
Posts: 7,089
Default Re: I need a charger schematic YLT6722000

need to figure out why it's over current, surprised lm358s fry as their outputs were specced to be shorted to a rail indefinitely, but not beyond a rail.

What capacitor was there?

This can't be the 2A output, must be a feedback output of some sort...
eccerr0r is offline   Reply With Quote
Old 11-04-2021, 10:43 AM   #11
Alexbp
Member
 
Join Date: Aug 2021
City & State: Siegburg
My Country: Germany
I'm a: Knowledge Seeker
Posts: 41
Default Re: I need a charger schematic YLT6722000

current consumption when charging 2.10A
Alexbp is offline   Reply With Quote
Old 11-04-2021, 10:48 AM   #12
Alexbp
Member
 
Join Date: Aug 2021
City & State: Siegburg
My Country: Germany
I'm a: Knowledge Seeker
Posts: 41
Default Re: I need a charger schematic YLT6722000

capacitor 100 F 35v
Alexbp is offline   Reply With Quote
Old 11-04-2021, 10:54 AM   #13
Alexbp
Member
 
Join Date: Aug 2021
City & State: Siegburg
My Country: Germany
I'm a: Knowledge Seeker
Posts: 41
Default Re: I need a charger schematic YLT6722000

LM358 ok replaced the diode all works, but how long
Alexbp is offline   Reply With Quote
Old 11-04-2021, 12:31 PM   #14
eccerr0r
Solder Sloth
 
eccerr0r's Avatar
 
Join Date: Nov 2012
City & State: CO
My Country: USA
Line Voltage: 120VAC 60Hz
I'm a: Hobbyist Tech
Posts: 7,089
Default Re: I need a charger schematic YLT6722000

Anything other than the diode cooking?

Putting a 1N4007 or 1N5407 or a fake FR207 will cause it to self cook.
eccerr0r is offline   Reply With Quote
Old 11-04-2021, 01:08 PM   #15
Alexbp
Member
 
Join Date: Aug 2021
City & State: Siegburg
My Country: Germany
I'm a: Knowledge Seeker
Posts: 41
Default Re: I need a charger schematic YLT6722000

also heats up MUR1060FCT
Attached Images
File Type: jpg 2021_10_31_22_09_IMG_6790 1.jpg (549.0 KB, 12 views)
Alexbp is offline   Reply With Quote
Old 11-04-2021, 03:03 PM   #16
eccerr0r
Solder Sloth
 
eccerr0r's Avatar
 
Join Date: Nov 2012
City & State: CO
My Country: USA
Line Voltage: 120VAC 60Hz
I'm a: Hobbyist Tech
Posts: 7,089
Default Re: I need a charger schematic YLT6722000

Does it heat up with nothing connected?
Sure the battery that's being charged is okay?
Might be normal too, or simply underdesigned...
eccerr0r is offline   Reply With Quote
Old 11-05-2021, 08:18 AM   #17
Alexbp
Member
 
Join Date: Aug 2021
City & State: Siegburg
My Country: Germany
I'm a: Knowledge Seeker
Posts: 41
Default Re: I need a charger schematic YLT6722000

without load all cold voltage at the output 67.4v, when you connect the battery is strongly heated FR207, the output is 54v
Alexbp is offline   Reply With Quote
Old 11-05-2021, 08:22 AM   #18
Alexbp
Member
 
Join Date: Aug 2021
City & State: Siegburg
My Country: Germany
I'm a: Knowledge Seeker
Posts: 41
Default Re: I need a charger schematic YLT6722000

Before it happened, the battery was connected to the bike and had not been moved for 2 months.
Alexbp is offline   Reply With Quote
Old 11-05-2021, 08:32 AM   #19
eccerr0r
Solder Sloth
 
eccerr0r's Avatar
 
Join Date: Nov 2012
City & State: CO
My Country: USA
Line Voltage: 120VAC 60Hz
I'm a: Hobbyist Tech
Posts: 7,089
Default Re: I need a charger schematic YLT6722000

how many volts is the battery by itself? Does the battery have shorted cells? Li-ion or SLA battery?

FR207 heating up is still kind of strange, the MUR1060FCT I can understand heating up...
eccerr0r is offline   Reply With Quote
Old 11-05-2021, 08:38 AM   #20
eccerr0r
Solder Sloth
 
eccerr0r's Avatar
 
Join Date: Nov 2012
City & State: CO
My Country: USA
Line Voltage: 120VAC 60Hz
I'm a: Hobbyist Tech
Posts: 7,089
Default Re: I need a charger schematic YLT6722000

BTW If you must "upgrade" the FR207, you can try the FR307 but I don't think that's the right course of action...

oops accidental double post...
eccerr0r is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Badcaps.net Technical Forums 2003 - 2022
Powered by vBulletin ®
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
All times are GMT -6. The time now is 09:20 AM.
Did you find this forum helpful?