Badcaps.net Forum
Go Back   Badcaps Forums > Troubleshooting Hardware & Devices and Electronics Theory > Troubleshooting Laptops, Tablets, and Mobile Devices
Register FAQ Calendar Search Today's Posts Mark Forums Read

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 12-27-2019, 11:40 AM   #17
chorumluum
New Member
 
Join Date: Dec 2019
City & State: Eskişehir
My Country: Türkiye
I'm a: Knowledge Seeker
Posts: 10
Default Re: Dell INSPIRION 15 7567 BSOD

Quote:
Originally Posted by jasko_jacker View Post
I soldered a new dual mosfet , changed the burnt coil and replace the inductor. Now at the end of PL901 there is 1.4V . all that remains is to replace the capacitor (19V to GND) with an appropriate value, which value do you recommend?
No problem with down side. My problem with top side.
1.jpg
this ? probably wrong or my dead resistor give my technician wrong value?
chorumluum is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Badcaps.net Technical Forums © 2003 - 2022
Powered by vBulletin ®
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
All times are GMT -6. The time now is 10:23 PM.
Did you find this forum helpful?