Hi guys and gals...
Need a bit of guidance again...
Above mentioned system and mainboard.
Came in for not loading Windows from current install. Gives a psychedelic screen as seen in the video ( which by the way is the same symptoms as I am getting now).
So far, I have changed the RAM ( replaced the 4GB with another, changed to an 8GB), swapped HDD to and SSD and tried a clean install which fails each and every time ( tried from 1903 to 20h2), tried with a SSD & HDD with preinstalled O/S, disconnected one by one until all cables have been detached, run direct through a monitor, re-flashed the BIOS, replaced the main board entirely, and still have the same issue. The replacement mainboard has been guaranteed working and is currently being checked by the supplier.
Now, changing the mainboard entirely, I would have though would have resolved the issue. I did test the mainboard prior to fitting, with my RAM, USB keyboard and mouse, monitor, tried to boot from a Win10 USB. It did start to load the O/S but crashed at the first GUI screen with the same psychedelic screen. Also, tired different PSU.
Would anyone else have any insight into what, where, why, when?
Thanks in advance.
Also, having an issue getting the video up so I have placed it on my server and can be accessed here
Need a bit of guidance again...
Above mentioned system and mainboard.
Came in for not loading Windows from current install. Gives a psychedelic screen as seen in the video ( which by the way is the same symptoms as I am getting now).
So far, I have changed the RAM ( replaced the 4GB with another, changed to an 8GB), swapped HDD to and SSD and tried a clean install which fails each and every time ( tried from 1903 to 20h2), tried with a SSD & HDD with preinstalled O/S, disconnected one by one until all cables have been detached, run direct through a monitor, re-flashed the BIOS, replaced the main board entirely, and still have the same issue. The replacement mainboard has been guaranteed working and is currently being checked by the supplier.
Now, changing the mainboard entirely, I would have though would have resolved the issue. I did test the mainboard prior to fitting, with my RAM, USB keyboard and mouse, monitor, tried to boot from a Win10 USB. It did start to load the O/S but crashed at the first GUI screen with the same psychedelic screen. Also, tired different PSU.
Would anyone else have any insight into what, where, why, when?
Thanks in advance.
Also, having an issue getting the video up so I have placed it on my server and can be accessed here
Comment