okay , try this,,,
i was rebuild from your old bios (Descriptor,ME,Gbe region), and bios region from extracted update panasonic
BIOS_G1_V201L19.EXE
injected your SN,Model,Winkey from your bios..
goodluck
I have a ch341a programmer. Previously, they were flashing other laptops and everything was fine. Firmware version CH341A Programmer
1.34. I evaporate the chips before the firmware. When checking the buffer, it throws an error on FZ-G1. There is also a program NeoProgrammer 2.1.0.16. In it, a buffer check passes. I was stitching the latest dumps of this tablet with it. But the tablet has a black screen. Only indicators work. Maybe there is a problem with my programmator?
I think the problem is either in the programmer or in the program. I soldered the Bios chip. The program erases, checks for a dummy, writes. But when it comes to checking, the program says that the buffer does not match. That was all my attempts.
what model your ch341a ? black? there s 2version 3 and 5 v...
and have you try other software? like asprogrammer
Hi. Today I purchased the ezp2010 programmator. From the first time it turned out to flash your last Bios. The one that has the title "New". This miracle finally happened. I am very grateful to you. Without you, I would not have succeeded. 😄😄😄👍👍👍
Comment