ME Firmware Cleaning Guide

[hardware1]

Re: ME Firmware Cleaning Guide

some one can clear me for me this bios?

I can't even Analyze your file using MEA, try to read the chip again.

I think it will be better to create a New thread with your Device name "HP ZBook Firefly 14 inch G8".

[SMDFlea]

Re: ME Firmware Cleaning Guide

some one can clear me for me this bios?

Is it the same bios youve already asked about in the HP ZBook Studio G8 thread - https://www.badcaps.net/forum/showpo...3&postcount=14 . What is your model,firefly or studio G8 .If its the same bios you`re asking for just bump that thread,no need to post the same thing again.If its a different one then start a new thread.

[black0hackers]

Re: ME Firmware Cleaning Guide

Is it the same bios youve already asked about in the HP ZBook Studio G8 thread - https://www.badcaps.net/forum/showpo...3&postcount=14 . What is your model,firefly or studio G8 .If its the same bios you`re asking for just bump that thread,no need to post the same thing again.If its a different one then start a new thread.

this one is HP Zbook Firefly 14 G8
SN: 5CG2071904

[wishes2022]

Re: ME Firmware Cleaning Guide

good job.

[swammyw]

Re: ME Firmware Cleaning Guide

if i take bios dump from biosrequest section and flash it will it then contain me region also? ..would it work if me region is gone corrupted?

[black0hackers]

Re: ME Firmware Cleaning Guide

Some one have v16 for gen 12?
Flash Image Tool v 16.x.x.x.x

[OKRPKCOMP]

Re: ME Firmware Cleaning Guide

Thanks sir, after a long time and reading it again and again. i understand it nearabout
Badcap

[ioan.onutu]

Re: ME Firmware Cleaning Guide

Hello guys,
I need the firmware bin file CSE ME 12.0.35.1427 CNP-LP C, and I cannot find it anywhere, do you have any idea if it is possible to find it?

Thank you in advance.

[SMDFlea]

Re: ME Firmware Cleaning Guide

Hello guys,
I need the firmware bin file CSE ME 12.0.35.1427 CNP-LP C, and I cannot find it anywhere, do you have any idea if it is possible to find it?

Thank you in advance.

If you can`t find it anywhere its ok to use the next oldest or newest version. Use PRD_RGN .
.

[hardware1]

Re: ME Firmware Cleaning Guide

Hello guys,
I need the firmware bin file CSE ME 12.0.35.1427 CNP-LP C, and I cannot find it anywhere, do you have any idea if it is possible to find it?

Thank you in advance.

It's already exist in Win-Raid`s Repository (Check the attached links in Post #1).
Also you are using a very old version for ME_Analyzer.

[kuraimangetsu]

What flash image tool

Hi
what fit flash image tool to use with
"11.8.50.347" ?

[SMDFlea]

Re: What flash image tool

Hi
what fit flash image tool to use with
"11.8.50.347" ?

11.8.xx.xxx

.

[kuraimangetsu]

Re: What flash image tool

11.8.xx.xxx

.

great. so the most important is the first digits like 12.5.xx.xxx?
thanks

[Vesko356]

Re: What flash image tool

great. so the most important is the first digits like 12.5.xx.xxx?
thanks

Yes.
Do yourself a favor and read again post #1, as well as the linked topics.

.

[menthol]

Re: ME Firmware Cleaning Guide

Hi guys

Mentioned in the Win Raid forum

D4. CSME 11 - 15 & CSTXE 3 - 4
15. is the "fptw64 -greset" step unnecessary when writing with a ROM writer?

[anhbanxoi]

Re: ME Firmware Cleaning Guide

Does anyone have the tool to clear ME 16.1.25.1932 ?

[Recmad]

Re: ME Firmware Cleaning Guide

Thank you. You are great )

[Redion]

Re: ME Firmware Cleaning Guide

Hi everyone, I am looking for Flash Image Tool 14.0.45.1389, does anyone have it for download?

[pcnetwork]

Re: ME Firmware Cleaning Guide

Thank you very much, it is very good information

[Prott]

Re: ME Firmware Cleaning Guide

Thank you so much SMDFlea for the great and easy to follow guide.

I am recently trying to clean the ME on Surface Pro 7 (CSME 13), however I am unable to find the "SMIP signning field" in the FIT. The FIT only lists non-zero OEM Public Key and OEM Key Manifest Binary.
I tried to ignore this step, but simply overwritting the ME Sub Partition with a clean one and exporting the bios is not working - the tablet just turns on and off.

Thank you