Announcement

Collapse
No announcement yet.

Hp g62-460st daax1jmb8c0 rev:c shutdown after a second problem

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Hp g62-460st daax1jmb8c0 rev:c shutdown after a second problem

    Hi, HP G62-460ST DAAX1JMB8C0 REV:C is power on but shutting down after a second. i flashed EC and MAIN but the problem is same. When i check with the debug card it is shutting down when it checks CPU. I dont have the schema. Any advice is welcome. Thanks

    PS: it has i3 processor which is onboard so its not removable
    Last edited by ahmetozay; 01-17-2015, 04:44 AM.

    #2
    Re: Hp g62-460st daax1jmb8c0 rev:c shutdown after a second problem

    u have short in power switched rail. check all big coils for resistance to ground

    Comment


      #3
      Re: Hp g62-460st daax1jmb8c0 rev:c shutdown after a second problem

      Originally posted by ktmmotocross View Post
      u have short in power switched rail. check all big coils for resistance to ground
      no short in power rail, checked all coils resistant to ground and its ok.

      Comment


        #4
        Re: Hp g62-460st daax1jmb8c0 rev:c shutdown after a second problem

        than check all small coils

        Comment


          #5
          Re: Hp g62-460st daax1jmb8c0 rev:c shutdown after a second problem

          Originally posted by ktmmotocross View Post
          than check all small coils
          checked all on motherboard no short circuit. when i bend the board it works so there is a crack or cold joint on the board. still working on it

          Comment


            #6
            Re: Hp g62-460st daax1jmb8c0 rev:c shutdown after a second problem

            i have the same problem; but i found short in big coil pl27. if same one have the schematic share it please

            Comment


              #7
              Re: Hp g62-460st daax1jmb8c0 rev:c shutdown after a second problem

              Originally posted by ahmetozay View Post
              checked all on motherboard no short circuit. when i bend the board it works so there is a crack or cold joint on the board. still working on it
              i suspect cold northbridge i would go for a reballing

              Comment


                #8
                Re: Hp g62-460st daax1jmb8c0 rev:c shutdown after a second problem

                pls i need this bios for HP G62-460ST DAAX1JMB8C0 REV:C

                Comment


                  #9
                  Re: Hp g62-460st daax1jmb8c0 rev:c shutdown after a second problem

                  Originally posted by kadi144 View Post
                  pls i need this bios for HP G62-460ST DAAX1JMB8C0 REV:C
                  backup and try .......please reply
                  Attached Files

                  Comment


                    #10
                    Re: Hp g62-460st daax1jmb8c0 rev:c shutdown after a second problem

                    Originally posted by sourcebf View Post
                    backup and try .......please reply
                    I need bios bin of hp g42-458tu board no is daax1jmb8co rev c

                    Comment


                      #11
                      Re: Hp g62-460st daax1jmb8c0 rev:c shutdown after a second problem

                      Originally posted by Wani View Post
                      I need bios bin of hp g42-458tu board no is daax1jmb8co rev c
                      Search the BIOS request section - https://www.badcaps.net/forum/forumdisplay.php?f=15

                      Comment

                      Working...
                      X