Hi, ive picked up a Panasonic Home Theatre System (SA-PT860) from a friend and when i plug it in i get the red standby light, but it wont power on when i press the switch or the power button on the remote. He said it was working a few months ago.
I opened it up and i cant see anything visually wrong but i havent done too much of this, so i could be wrong.
ive grabbed the service manual and had a look at other threads but im not sure how to proceed.
its similar to this thread but i dont get any noise from the standby transformer.
ive measured 6 Volts on sys6v - pin 2 on CN5802
i tried shorting am_bp with sys6v (as suggested by that thread) but it didnt power on the unit.
Any help would be appreciated!
I opened it up and i cant see anything visually wrong but i havent done too much of this, so i could be wrong.
ive grabbed the service manual and had a look at other threads but im not sure how to proceed.
its similar to this thread but i dont get any noise from the standby transformer.
ive measured 6 Volts on sys6v - pin 2 on CN5802
i tried shorting am_bp with sys6v (as suggested by that thread) but it didnt power on the unit.
Any help would be appreciated!
Attached Files
Comment