Luxor TV board input board change but picture upside down

[garrymc123]

Looking for some advice changed over the video input board due to bad hdmi ports but now the picture is upside down tried the service menu but can't find anything to do with flip the picture..

Is there anything I can do to flip the picture or do I need to change the board again..

Thanks
Garry

[cheeky2]

Re: Luxor TV board input board change but picture upside down

So I assume you have a VES550UNDS-2D-N11 screen inside your TV. If you do then if the board you have inside it is the one pictured, then you have a faulty board! As they only do one main board for that model of TV.

[nomoresonys]

Re: Luxor TV board input board change but picture upside down

when you get into the service menu with 4725 what are all the choices? factory reset might work.

[vinceroger69]

Re: Luxor TV board input board change but picture upside down

i think with vestel you need a panel profile on a usb stick

[yokoono]

Re: Luxor TV board input board change but picture upside down

I saw that the motherboard is 17mb97. If you also say the panel code (VESxxxxxxxxx), I will help you with a panel profile. In 3 minutes it is solved.

[garrymc123]

Re: Luxor TV board input board change but picture upside down

Yeah it is a ves panel

[yokoono]

Re: Luxor TV board input board change but picture upside down

1. Format a stick with FAT32
2. Put a folder called PQ on the stick
3. Unzip and put the 2 files in the pq folder
3. Turn on the TV and insert the USB stick
4. Type MENU 4725
5. Go to USB Operations and type OK on the remote control
6. Wait 10 seconds and exit the menu with back/return
7. Turn off the TV from the remote control and wait 10-20 seconds
8. Unplug the TV and wait until the stby LED on the TV turns off
9. Take out the stick, plug it in and turn on the TV.

[garrymc123]

Re: Luxor TV board input board change but picture upside down

Brilliant yokoono that it sorted thanks again to this forum.. Thanks

[TvUser1234]

Re: Luxor TV board input board change but picture upside down

Hey yokoono,

Any chance you have a profile for
VES43DUNDA-2D-N12

If you do that would be amazing

[yokoono]

Re: Luxor TV board input board change but picture upside down

Cod main (17mbxxxxxx) ????.

[TvUser1234]

Re: Luxor TV board input board change but picture upside down

17mb97

[yokoono]

Re: Luxor TV board input board change but picture upside down

I don't have a profile for this panel. What problems does the image have?

[TvUser1234]

Re: Luxor TV board input board change but picture upside down

The image is upside down, unfortunately.
I can order a new board I just thought I'd ask here first��

[yokoono]

Re: Luxor TV board input board change but picture upside down

Save the TV profile on the stick.
1. Format the stick with fat 32
2. Create a folder called downloadpq.mb95 on the stick
3. MENU, 4725, go to USB Operations, OK.
4. Post the resulting profile from the stick and make the change

[TvUser1234]

Re: Luxor TV board input board change but picture upside down

Hey I'm so sorry for the late reply I had a death in the family and its been a tough time. Are you still happy to try and help me?

[TvUser1234]

Re: Luxor TV board input board change but picture upside down

I followed your steps but the downloadpq.mb95 folder is blank.
In the service menu It does have "Profile:File Not Found"

[yokoono]

Re: Luxor TV board input board change but picture upside down

Try with another stick of smaller capacity. Maximum 16Gb.

[TvUser1234]

Re: Luxor TV board input board change but picture upside down

I will go try now. I used a 16gb there but I have a 4gb

[arizanotlari]

Re: Luxor TV board input board change but picture upside down

https://disk.yandex.com/d/-YdVftsdIffr6w

[TvUser1234]

Re: Luxor TV board input board change but picture upside down

This is all im getting