Announcement

Collapse
No announcement yet.

Technika T32HD-278-17 (VESTEL)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Technika T32HD-278-17 (VESTEL)

    Hello everyone!

    My crappy Technika TV has a flashing red light symptom. Black screen, Voltages looks good.

    Does anyone have the EEPROM bin file for this model?

    Technika T32HD
    MB: Vestel 17MB140
    Panel: VES315WNDA

    Thank you!

    #2
    Re: Technika T32HD-278-17 (VESTEL)

    You can try the repair software. It's for the stick.
    Attached Files

    Comment


      #3
      Re: Technika T32HD-278-17 (VESTEL)

      Originally posted by yokoono View Post
      You can try the repair software. It's for the stick.

      Thank you!

      I will try it tomorrow and report back with the results.

      Comment


        #4
        Re: Technika T32HD-278-17 (VESTEL)

        Originally posted by yokoono View Post
        You can try the repair software. It's for the stick.
        I tried the reset software, but sadly nothing happened. The blinking is still there and nothing got written on the stick. I formatted it to fat32.

        Should I try to flash this bin file directly to the eeprom?

        Comment


          #5
          Re: Technika T32HD-278-17 (VESTEL)

          1. Unzip and put the files on the stick
          2. Unplug the TV and insert the USB stick
          3. Press the OK key on the remote control and press and hold
          4. Plug in the TV.
          5. When the stby LED on the TV flashes quickly, the OK key is released
          6. Wait for it to finish. It can take up to 10 minutes.

          Comment


            #6
            Re: Technika T32HD-278-17 (VESTEL)

            Originally posted by yokoono View Post
            1. Unzip and put the files on the stick
            2. Unplug the TV and insert the USB stick
            3. Press the OK key on the remote control and press and hold
            4. Plug in the TV.
            5. When the stby LED on the TV flashes quickly, the OK key is released
            6. Wait for it to finish. It can take up to 10 minutes.
            No change.
            I hold down the OK button on the the remote as I plug it in.
            It start blinking slowly and that's it. Like it's not detecting the remote signals. Altough the remote works (tested with camera).

            Comment

            Working...
            X