I have a GTX 1070 Strix that has all the voltages, boots, but shows no image. The screen detects the input after some time, but it stays black. After running MATS i found out that only the Memory Bank c0 was giving errors. Since i don't have a hot air station or skills to change the memory myself i've asked a technician to change the memory bank.
The result was exactly the same. Still no image and still errors on bank c0. As far as i know if the issue is with the memory controller usually the banks fail in pairs (c0 and c1). I'm also making available the mats reports before and after the memory change in case it helps. Is there a possibility of something other than a dead core/memory controller?
Thank you
The result was exactly the same. Still no image and still errors on bank c0. As far as i know if the issue is with the memory controller usually the banks fail in pairs (c0 and c1). I'm also making available the mats reports before and after the memory change in case it helps. Is there a possibility of something other than a dead core/memory controller?
Thank you
Comment