hello,
there is an asus gtx1650 which displays fine in windows but if i run a benchmark test it displays artifacts and the driver crashes after a second or two.
I changed pads and thermal paste.
I run mats test but it is reporting 0 errors.
I then tried to run the mods version 400.271_1650 test, it first ran and stopped with a 'breakpoints limit reached after 5 retries' error and the fans went full speed.
After a reboot, I tried to run the test again, but now the test fails and says "ERROR: Couldn't clear GPU's interrupt state; int1 == 0x00800000.
Error 000000000608 : Gpu.Initialize Interrupt request line stuck asserted"
How can I solve this problem? do you have an idea about the origin of the first problem?
Before the problem worsened here is how it was behaing:
https://drive.google.com/file/d/1CoL...ew?usp=sharing
Here is the latest mods.log file
Thank you.
there is an asus gtx1650 which displays fine in windows but if i run a benchmark test it displays artifacts and the driver crashes after a second or two.
I changed pads and thermal paste.
I run mats test but it is reporting 0 errors.
I then tried to run the mods version 400.271_1650 test, it first ran and stopped with a 'breakpoints limit reached after 5 retries' error and the fans went full speed.
After a reboot, I tried to run the test again, but now the test fails and says "ERROR: Couldn't clear GPU's interrupt state; int1 == 0x00800000.
Error 000000000608 : Gpu.Initialize Interrupt request line stuck asserted"
How can I solve this problem? do you have an idea about the origin of the first problem?
Before the problem worsened here is how it was behaing:
https://drive.google.com/file/d/1CoL...ew?usp=sharing
Here is the latest mods.log file
Code:
MODS start: Tue Jan 25 21:33:00 2022 Command Line : gputest.js -oqa -skip 154 -testarg 293 UseI2cReads true -testarg 171 SkipSerialNumCheck 1 -testarg 1 IgnoreRgbMcuFwCheck true -adc_cal_check_ignore CPU Foundry : GenuineIntel Name : Intel(R) Pentium(R) Gold G5500 CPU @ 3.80GHz Family : 6 Model : 14 Stepping : 11 Version MODS : 400.271 OperatingSystem: Linux (x86_64) Kernel : 4.17.4-gentoo KernelDriver : 3.87 SBIOS Version : 2301 SBIOS Date : 07/10/2020 HostName : tinylinux GPU 0 [01:00.0] dev.sub 0.0 ---------------------------------------- DevInst : 0 PCI Location : 0x00, 0x01, 0x00, 0x00 GPU DID : 0x1f82 PDI : 0x0cc46a5d6407a2ff Raw ECID : 0x015fd1c00000006dd7800991 Raw ECID (GHS) : 0x1646dd7800800000007fe8280 ECID : PRTU02-07_x-3_y10 Device Id : TU117 Revision : a1 NV Base : 0xa3000000 FB Base : 0x90000000 IRQ : 11 ERROR: Couldn't clear GPU's interrupt state; int1 == 0x00800000. Error 000000000608 : Gpu.Initialize Interrupt request line stuck asserted Error 000000000608 : Global.PrintGpuInitError Interrupt request line stuck asserted Error 000000000608 : Global.InitializeGpuTests Interrupt request line stuck asserted PexDevMgr not initialized. Bridge device shutdowns will likely do nothing. Error Code = 000000000608 (Interrupt request line stuck asserted) ####### #### ######## ### ####### ###### ######## ### ## ## ## ## ### ## ## ## ## ### ####### ######## ## ### ####### ######## ## ### ## ## ## ## ### ## ## ## ######## ######## ## ## ## ######## ######## MODS end : Tue Jan 25 21:33:02 2022 [2.767 seconds (00:00:02.767 h:m:s)]