this board was sent to me by topcat as dead after recap.
so i dug in to it and here is what i found
the vrm controller chip a mosfet and a 10 ohm resistor as seen in pic
btw the sc1182csw is pin compatible with the 1164 these boards came with.
this board works fine now.
i guess it wont mind a leaded resistor since i dont have any smt that size.
so i dug in to it and here is what i found
the vrm controller chip a mosfet and a 10 ohm resistor as seen in pic
btw the sc1182csw is pin compatible with the 1164 these boards came with.
this board works fine now.
i guess it wont mind a leaded resistor since i dont have any smt that size.
Comment