Inno3d GTX 980TI 6GB shorted vmem

[tohetlan]

Hello
I have a shorted vmem 0ohm and shorted high mosfet(12v), i removed the inductors and injected low voltage and 8amps.
2 of the ramchips got hot and i removed them, they was shorted and i now have 0,8ohms on the board to rest of the ram and controller(gpu).
My question: is there any chance that Gpu could survive this and is any point to proceed to remove all ramchips.

And could someone get me schematics and boardoverview.

Tanks😀

[ktmmotocross]

Re: Inno3d GTX 980TI 6GB shorted vmem

there is allways chance, but if u inject and only thing that heats up is gpu, u know what it means

[tohetlan]

Re: Inno3d GTX 980TI 6GB shorted vmem

Ok, tanks, yes bad Luck for me.
On this point it is only the chips thats get hot, maby the only way to find out if the memory controller survived is to remove all chips?

[tohetlan]

Re: Inno3d GTX 980TI 6GB shorted vmem

Game over for this gpu, removed all the ramchips and now the gpu gets hot.