Card works for a short while, then black screens, 1.8V is still present but 1.8V_POK disappears(measured at pin 1 GS7103 1.8V chip) taking PEX and the other rails with it.
Anything else I can look at other than the GS7103 chip? I did try to remove it, but didn't wanna come off with 2 soldering irons or 450°C air I'll have to clear a space for the preheater tomorrow...
Anything else I can look at other than the GS7103 chip? I did try to remove it, but didn't wanna come off with 2 soldering irons or 450°C air I'll have to clear a space for the preheater tomorrow...
Comment