Hello to all,
I repaired a RX 470 4Gb from sapphire it was a mosfet HS on the VCORE only 1 and the card works again in games.
Except that at the time of the test FURMARK I have falls of frequencies of approximately to 300mhz then goes up in the 1030 mhz every 5 seconds or more when it turns to 73 degrees approximately.
The image jerks then becomes fluid again and so on as loss of images per second
In games it makes him from time to time falls of FPS
This is not ideal during the game =S
Is it an unstable capacitor on the +VDCC line of the vcore?
What advice =D
Thanks a lot to you
I repaired a RX 470 4Gb from sapphire it was a mosfet HS on the VCORE only 1 and the card works again in games.
Except that at the time of the test FURMARK I have falls of frequencies of approximately to 300mhz then goes up in the 1030 mhz every 5 seconds or more when it turns to 73 degrees approximately.
The image jerks then becomes fluid again and so on as loss of images per second
In games it makes him from time to time falls of FPS
This is not ideal during the game =S
Is it an unstable capacitor on the +VDCC line of the vcore?
What advice =D
Thanks a lot to you
Comment