Component identification on BenQ GL2580H (715G8436-M01-000-004L)

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • tekil4o
    New Member
    • Jul 2020
    • 2
    • Bulgaria

    #1

    Component identification on BenQ GL2580H (715G8436-M01-000-004L)

    Hello!

    I'm trying to fix a image flickering problem (from time to time) of a BenQ GL2580H monitor. Some times the image is perfect but most of the time when you turn the monitor on the image is flickering like the refresh rate is mismatched. It flicker even without connected source. After testing of the voltages unfortunately the main board lost power - power supply board still provides steady 18.04v (pcb markings says 19v) but that voltage is lost at U705 from the pictures. The component is labeled "YVAJF" but I cannot find anything in the internet to tell me what it is actually so I could replace it.

    Could someone help me out?

    Details:
    Monitor: BenQ GL2580H
    MainBoard: 715G8436-M01-000-004L
    Attached Files

Related Topics

Collapse

  • reessi
    ACER BM320 Monitor - Horizonal Flickering Lines After a While
    by reessi
    Hello,

    The monitor started off showing flickering thin (1 pixel) lines horizontally every say 3mm..

    They are black on the right and gradually fade to nothing on the far left.
    They start either after 5 mins or up to 2 hours after so annoying for testing.
    They flicker continuously very fast! With a slight pause milli-second every second.

    Initially I cleaned the LVDS cable and connected to the T-Con and then it worked fine for 3 weeks but not sure if this was just co-incidence.

    I tested each half by removing the first the left flex from...
    06-03-2025, 09:58 AM
  • momaka
    HannStar Hanns-G HC194d LCD monitor repair
    by momaka
    Normally, I never post repairs this quick after I do them, because… I am usually very slow. But today, I’m making an exception here. Why? No idea. Perhaps only because the repair details are still “fresh” in my head… which is ironic, given this is a 16 year old monitor that hardly anyone will care about today. It is new to me, though. I picked it up last November from someone on my local Craigslist. It wasn’t very close to where I live, but was close to a family friend that I had to go visit anyways. So after watching the posting on Craigslist for a few weeks and seeing it getting...
    03-15-2023, 10:17 PM
  • 3D Modelka
    AOC 27 monitor Q27G2WG4 doesn't display logo or image on screen
    by 3D Modelka
    Hello. I have a problem with my AOC 27 monitor, specifically model Q27G2WG4, which I have been using for 3 years. The monitor stopped turning on: when I turn it on, the backlight turns on, the indicator starts glowing white, but the logo on the screen does not appear, and there is no image. However, if I check in the Windows system, the monitor is displayed as connected and working. I tried connecting it via HDMI and DP, but the result remains the same. If I turn the monitor on and off multiple times, it will eventually start and work. However, when the monitor is working, there are no issues....
    02-09-2024, 02:42 AM
  • Coguar
    HP ProOne 23.8 inch G9 ALL-in-One Desktop PC - Working when plugged to an external monitor, no image otherwise
    by Coguar
    In the device manager there is no built-in display located. The Intel UHD Graphics are displayed and only the external display is visible. The AiO turns on and works but is only showing a black screen on the monitor.
    I checked the voltage on the backlight connector and it reads ~20V. I tried reseating the LVDS and Backlight connector, yet the image still does not show.

    Does anyone have ideas whether or not this is a BIOS related issue? The only visible log in the BIOS logs is that the firmware was updated around a month ago.
    We already tried to fix it by resetting the...
    06-23-2025, 07:14 AM
  • jvelez
    Fujitsu monitor: power is there, but no image from PC
    by jvelez
    Hi, seeking for guidance on the following:
    I have a Fujitsu Siemens monitor T19-1 (base model is C19-1) that stopped showing any picture, besides the FS logo when it boots.

    I'm attaching a picture of the system board with some additional info.
    - The monitor recognizes the presence of the VGA signal: the power button switches from amber to blue, and vice-versa when the computer goes sleeping.
    - The inverter + CCFL seems to be working fine: the Fujitsu-Siemens logo appears when the monitor is switched on.
    - I measured the values in the power regulators:...
    11-06-2023, 02:08 PM
  • Loading...
  • No more items.
Working...