Announcement

Collapse
No announcement yet.

Bush DLED40127FHDCNTD - Software dump

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Bush DLED40127FHDCNTD - Software dump

    Have one of these Vestal built dumps in the workshop at the momemt with a faulty mainboard. I also have a working one as well that is currently up for sale - both sets have the same part numbers on the main board and is there a way of extracting the firmware off the working set onto USB? Then to install onto the corrupted one?

    Thanks

    #2
    Re: Bush DLED40127FHDCNTD - Software dump

    You can look into editing the boot configuration file on an update USB.

    These vestel sets use u-boot which is open source software. It is what loads the flash memory correctly.

    It is possible to edit the u-boot txt file to make it copy the flash to a USB drive, instead of load the flash image. However, do be aware, that when messing with things like this, it is possible to brick your working set, if you get a command wrong.
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment

    Working...
    X