Hi good day to all the problem of this board is shorted I already remove the "PD8, PQ22, PR213" and I just make a jumper from pj2 connector Vin to PR213 pad, now the battery is not working
Battery connected Checking voltage on pr169 reading is 800mill volt
PC118- 19V
PU5
PIN 18- 800MILI VOLT
PIN3 -18V
PIN4- 18V
PIN 28- 18V
PIN 6- 2.5V
PIN5-2.5V
PIN 11- 2.7V
PIN12- 3.2V
PIN 7 -600MILIVOLT
PIN 8 -3.3V
PIN 9 - 3V
PIN27- 0V
PIN17- 800MV
DA0ZRWMB6G0 REV G
Idont know whats wrong on this unit
schematic and boardview pdf is attached
Battery connected Checking voltage on pr169 reading is 800mill volt
PC118- 19V
PU5
PIN 18- 800MILI VOLT
PIN3 -18V
PIN4- 18V
PIN 28- 18V
PIN 6- 2.5V
PIN5-2.5V
PIN 11- 2.7V
PIN12- 3.2V
PIN 7 -600MILIVOLT
PIN 8 -3.3V
PIN 9 - 3V
PIN27- 0V
PIN17- 800MV
DA0ZRWMB6G0 REV G
Idont know whats wrong on this unit
schematic and boardview pdf is attached
Comment