Gigabyte 1070 part

[Tygarbyte]

Hi all, Im trying to repair this card - does anyone know the value of the cap thats blown - from my research it is on the B rail of the memory.

Also the other tatalum cap leaked, Markings is "jj" when I looked its value is suppose to be 0.22uF 6.3v but cant find any online. I notice that the gigabyte 1080 uses something similar but another brand - does anyone the value is - I cant find a clear image online.

[pelolu]

Re: Gigabyte 1070 part

You have either above & below two tantalum caps, seem similar to the leaked one.

JJ markings I swear are 2,2uF 6,3V

[Tygarbyte]

Re: Gigabyte 1070 part

Yes they are the same tatalum caps above and below the leaked one. I found a document online - Jj is 2.2uF 6.3v, where as jj ( lowercase is listed as 0.22fF / 6.3v ) I have looked at other 10xx boardview schematics however they dont them listed. I have seen a Gigabyte 1080 card with a different screen print on the same caps but cant find a High enough resolution image to find the values.