Announcement

Collapse
No announcement yet.

TPS65862IC Programmer & socket?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    TPS65862IC Programmer & socket?

    Hello,

    can someone tell me which is the correct programmer & socket for TPS65862IC ?

    I saw in the datasheet of the ic, that i2c programmer is used for.

    I never used i2c programmer before, but i have RT809H prorgammer.
    Can i use that too?
    I couldnt fount that ic type in the software of rt809H progammer.


    I uploaded the image of the ic

    Thanks for support !
    Attached Files

    #2
    Re: TPS65862IC Programmer & socket?

    chips like that are usually programmed on the board.
    see if the laptop - it's a laptop right?
    see if it has test-pads connected to the i²c points on the chip

    Comment


      #3
      Re: TPS65862IC Programmer & socket?

      Hello, thank you for your reply.

      No its a industrial device with a pcb like a notebook.

      The problem is there are no schematics for this board available.
      I see that the TP658621C is faulty, and i have to change it.

      I also have a defective board where i can track / trace the line to the progamming pins. But i cant find the correct datasheet for the TP658621C to find out the pinout.

      In this datasheet for TP658621C there is a pinout but the imaged bga has
      11 X 11 contacs(legs)

      https://pdf1.alldatasheetru.com/data...PS658621C.html


      My TP658621C hast 13X 13 contacts (legs)

      Why ?

      It isnt possible to programm it before i do solder it?
      Attached Files
      Last edited by Richi_el; 11-21-2021, 11:23 AM.

      Comment


        #4
        Re: TPS65862IC Programmer & socket?

        Ok sorry i seen that also 13 X 13 contacts on the datasheet wich i linked, but there is no pinout

        Comment

        Working...
        X