![]() |
|
|
Thread Tools | Display Modes |
![]() |
#1 |
Member
Join Date: Mar 2010
Posts: 98
|
![]() Can't get anything out of it. Power supply outputs all ) as well. The obvious answer is Power Supply Board unless it needs to be switched on by the Main Board. Suggestions?
Thanksl |
![]() |
![]() |
![]() |
#2 |
Badcaps Veteran
Join Date: Nov 2015
City & State: BC
My Country: Canada
I'm a: Knowledge Seeker
Posts: 1,379
|
![]() Power supply typically supplies standby voltage to the main board. When the TV is turned on, processor will send a power supply on to fully turn on ps and backlight on signal. If you have no standby voltage, power supply is suspect. Should be a main AC fuse you can check but fuses will blow due to shorted components.
|
![]() |
![]() |
![]() |
#3 |
Member
Join Date: Mar 2010
Posts: 98
|
![]() PS fuse checked OK, and with no standby voltage, I was assuming a PS problem. Thanks for the confirmation.
|
![]() |
![]() |
![]() |
#4 |
Badcaps Veteran
Join Date: Oct 2016
City & State: Bakersfield ca.
My Country: usa
Line Voltage: 120VAC 60Hz
I'm a: Knowledge Seeker
Posts: 2,806
|
![]() What is your voltage across main capacitor?
__________________
I assume no responsibility for any stupid suggestions I might post. |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|