Badcaps.net Forum
Go Back   Badcaps Forums > Troubleshooting Hardware & Devices and Electronics Theory > Troubleshooting Laptops, Portable, and Mobile Devices > BIOS Requests ONLY!
Register FAQ Calendar Search Today's Posts Mark Forums Read

 
Thread Tools Display Modes
Old 04-04-2017, 06:08 AM   #21
bello
New Member
 
Join Date: Oct 2011
City & State: Srebrenik
My Country: Bosnia and Herzegovina
Line Voltage: 220 V AC, 50Hz
I'm a: Professional Tech
Posts: 7
Default Re: SAMSUNG NP700Z7C - BIOS dump needed

There is original, maybe corrupted:
Attached Files
File Type: rar original_NP700Z7C.rar (3.11 MB, 18 views)
bello is offline   Reply With Quote
Old 04-04-2017, 04:52 PM   #22
techman1025
Badcaps Veteran
 
Join Date: Jun 2014
City & State: Fairfield, New jersey
My Country: United States
Line Voltage: 120VAC 60HZ
I'm a: Knowledge Seeker
Posts: 480
Default Re: SAMSUNG NP700Z7C - BIOS dump needed

Here
Techman1025
Attached Files
File Type: zip NP700Z7C_NEW.zip (2.69 MB, 24 views)
techman1025 is offline   Reply With Quote
Old 04-04-2017, 11:26 PM   #23
whaldsz
Badcaps Veteran
 
Join Date: Apr 2013
City & State: NE
My Country: Philippines
Line Voltage: 220VAC 60Hz
I'm a: Professional Tech
Posts: 387
Default Re: SAMSUNG NP700Z7C - BIOS dump needed

try this.
Attached Files
File Type: rar NP700Z7C_Clean.rar (2.93 MB, 24 views)

Last edited by whaldsz; 04-04-2017 at 11:28 PM..
whaldsz is offline   Reply With Quote
Old 04-05-2017, 03:36 AM   #24
bello
New Member
 
Join Date: Oct 2011
City & State: Srebrenik
My Country: Bosnia and Herzegovina
Line Voltage: 220 V AC, 50Hz
I'm a: Professional Tech
Posts: 7
Default Re: SAMSUNG NP700Z7C - BIOS dump needed

Thanks for fast answer. Flashed with techman1025 dump now I have progres bar with Phoenix logo but stucked, can't enter into bios with F2 or F4. With whaldsz dump behaves same as original...
I think motherboard is bad??
There's pictures:
Attached Images
File Type: jpg P4050162.JPG (107.8 KB, 12 views)
File Type: jpg P4050163.JPG (133.3 KB, 13 views)
bello is offline   Reply With Quote
Old 04-05-2017, 10:21 AM   #25
techman1025
Badcaps Veteran
 
Join Date: Jun 2014
City & State: Fairfield, New jersey
My Country: United States
Line Voltage: 120VAC 60HZ
I'm a: Knowledge Seeker
Posts: 480
Default Re: SAMSUNG NP700Z7C - BIOS dump needed

Hi
Pull Cmos battery for a few min and hold power button down then plug adapter only and retry.
Techman1025
techman1025 is offline   Reply With Quote
Old 04-05-2017, 01:17 PM   #26
bello
New Member
 
Join Date: Oct 2011
City & State: Srebrenik
My Country: Bosnia and Herzegovina
Line Voltage: 220 V AC, 50Hz
I'm a: Professional Tech
Posts: 7
Default Re: SAMSUNG NP700Z7C - BIOS dump needed

I tried it already...
Customer says that sometimes the start, after many attempts. The disc is correct, it is possible that the failure of the board ...
bello is offline   Reply With Quote
Old 04-05-2017, 04:59 PM   #27
techman1025
Badcaps Veteran
 
Join Date: Jun 2014
City & State: Fairfield, New jersey
My Country: United States
Line Voltage: 120VAC 60HZ
I'm a: Knowledge Seeker
Posts: 480
Default Re: SAMSUNG NP700Z7C - BIOS dump needed

Hi
You could try a new bios chip and reprogram it with mine. Also try with only one memory stick in and do the same for the other socket see if it hangs so only one at a time you might have a bad stick of memory or a bad socket if one socket is bad double up on one socket is the only fix.
Techman1025
techman1025 is offline   Reply With Quote
Old 04-05-2017, 06:26 PM   #28
whaldsz
Badcaps Veteran
 
Join Date: Apr 2013
City & State: NE
My Country: Philippines
Line Voltage: 220VAC 60Hz
I'm a: Professional Tech
Posts: 387
Default Re: SAMSUNG NP700Z7C - BIOS dump needed

Quote:
Originally Posted by bello View Post
I tried it already...
Customer says that sometimes the start, after many attempts. The disc is correct, it is possible that the failure of the board ...
ok, try again with this one.
Attached Files
File Type: rar NP700Z7C_new.rar (2.63 MB, 24 views)
whaldsz is offline   Reply With Quote
Old 04-06-2017, 02:50 AM   #29
bello
New Member
 
Join Date: Oct 2011
City & State: Srebrenik
My Country: Bosnia and Herzegovina
Line Voltage: 220 V AC, 50Hz
I'm a: Professional Tech
Posts: 7
Default Re: SAMSUNG NP700Z7C - BIOS dump needed

@techman1025
I tryed it also, one memory is soldered on the board and can't remove it. Also tryed with another bios chip...

@whaldsz
Nothing, same as other...

Anyway thanks a lot.
E.Lelic
bello is offline   Reply With Quote
Old 04-06-2017, 08:40 AM   #30
techman1025
Badcaps Veteran
 
Join Date: Jun 2014
City & State: Fairfield, New jersey
My Country: United States
Line Voltage: 120VAC 60HZ
I'm a: Knowledge Seeker
Posts: 480
Default Re: SAMSUNG NP700Z7C - BIOS dump needed

Hi
What i would do is put some good flux under the onboard memory chip's and apply a little heat like 100C then retest if it works you could always replace them.
Techman1025
techman1025 is offline   Reply With Quote
Old 04-07-2017, 03:39 AM   #31
bello
New Member
 
Join Date: Oct 2011
City & State: Srebrenik
My Country: Bosnia and Herzegovina
Line Voltage: 220 V AC, 50Hz
I'm a: Professional Tech
Posts: 7
Default Re: SAMSUNG NP700Z7C - BIOS dump needed

I tried to provoke him in the hot state, but nothing...
I think I'll give up.
bello is offline   Reply With Quote
Old 04-07-2017, 02:30 PM   #32
techman1025
Badcaps Veteran
 
Join Date: Jun 2014
City & State: Fairfield, New jersey
My Country: United States
Line Voltage: 120VAC 60HZ
I'm a: Knowledge Seeker
Posts: 480
Default Re: SAMSUNG NP700Z7C - BIOS dump needed

I AGREE
Techman1025
techman1025 is offline   Reply With Quote
Old 04-21-2017, 03:51 AM   #33
lining
New Member
 
Join Date: Mar 2017
City & State: Skopje
My Country: Macedonia
I'm a: Knowledge Seeker
Posts: 2
Default Re: SAMSUNG NP700Z7C - BIOS dump needed

NP700Z7C ba92 11017b dump maybe? accidentally erased the stock firmare before backup it first in my programer. I tried with last firmware whaldsz posted for BA92-10916B and only get backlight of the display and then he is restarting again and again and again
lining is offline   Reply With Quote
Old 02-24-2019, 01:29 AM   #34
jadao
New Member
 
Join Date: Sep 2015
City & State: Montreal, Quebec
My Country: Canada
I'm a: Knowledge Seeker
Posts: 1
Default Re: SAMSUNG NP700Z7C - BIOS dump needed

Hello,
I need NP700Z7C BA92-10916A working bios, any chance someone have it?
It is stuck in samsung logo.
Here is the suspected not working dump.
Thanks
Attached Files
File Type: rar NP700ZSC-S03CA.rar (3.15 MB, 2 views)
jadao is offline   Reply With Quote
Old 07-04-2020, 03:59 PM   #35
xe_d_sono
New Member
 
xe_d_sono's Avatar
 
Join Date: Aug 2013
City & State: Alentejo
My Country: Portugal
I'm a: Knowledge Seeker
Posts: 14
Default Re: SAMSUNG NP700Z7C - BIOS dump needed

Hello,

The solution to this Samsung Series machine is remove the dead iSSD flash from Sandisk. This cause a long freeze on boot.

I hope it helps.

Br
Attached Images
File Type: jpg image.jpg (809.7 KB, 3 views)

Last edited by xe_d_sono; 07-04-2020 at 04:02 PM..
xe_d_sono is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Badcaps.net Technical Forums 2003 - 2020
Powered by vBulletin ®
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
All times are GMT -6. The time now is 11:28 AM.
Did you find this forum helpful?