Hi all,
Have got this Uni-T Function Waveform Generator model UTG2025A with an issue of booting procedure. The generator tries to boot up and freezes on the booting logo "UNI-T" forever (please see photo enclosed). Please find this particular generator boot-log attached https://file.io/kZ8JjYwI9Iir ("UTG2025A_Generator_Boot_Log.txt") which was received via UART interface inside. It seems to be a problem with Firmware or maybe Memory (particular RAM) region.
Maybe anyone here in this forum has a Firmware file with which I could do reflashing and see whether it helps. If not, going to change RAM ICs.
Thanks in advance.
Have got this Uni-T Function Waveform Generator model UTG2025A with an issue of booting procedure. The generator tries to boot up and freezes on the booting logo "UNI-T" forever (please see photo enclosed). Please find this particular generator boot-log attached https://file.io/kZ8JjYwI9Iir ("UTG2025A_Generator_Boot_Log.txt") which was received via UART interface inside. It seems to be a problem with Firmware or maybe Memory (particular RAM) region.
Maybe anyone here in this forum has a Firmware file with which I could do reflashing and see whether it helps. If not, going to change RAM ICs.
Thanks in advance.