Bad PSU Thermistors blowing, no multimeter

[AlwaysCheap]

Re: Bad PSU Thermistors blowing, no multimeter

Considering it's a brand new psu it is pretty disappointing . Those caps don't look like they can hold much. Was considering recapping it.

[stj]

Re: Bad PSU Thermistors blowing, no multimeter

it should still have some warranty on it.

[AlwaysCheap]

Re: Bad PSU Thermistors blowing, no multimeter

Generally you might be able to just get another 13N50 clone to see if it works.

Rohm R5016FNX, ZDX130N50; NTE2939 might work. But I didn't really look at the spec sheets that carefully...

Yep thanks, searched but they are not available in our stores but I think I found a winner. The volts are a little high at 600V vs 500V and amp value is lower at 12A vs 13A. Gate voltage to source max is +30V which is the same as the 13N50.
Gate Threshold Voltage - Min: 2V Max: 4V vs 13N50 -Min: 3V Max: 5V

Here are the specs
FQP12N60C
N-Channel QFET®MOSFET 600 V, 12A, 650 mΩ
https://cdn.badcaps-static.com/pdfs/...943adceeef.pdf

vs


13N50 .

What do you guys think?