Re: Dreamlink T1 plus two green lights, need working dump
O.k. that is a eMMC. Usually they either work or they don't. I would flash a new firmware on it and go from there. You can look carefully on the 4 data lines with an oscilloscope and you will see a healthy activity.
Is there a possibility to get that little box into a emergency recovery mode, factory default or something? Then you could just insert a usb stick with the firmware and recover.
I came across this: http://www.aftvnews.com/how-to-unbri...mazon-fire-tv/
O.k. that is a eMMC. Usually they either work or they don't. I would flash a new firmware on it and go from there. You can look carefully on the 4 data lines with an oscilloscope and you will see a healthy activity.
Is there a possibility to get that little box into a emergency recovery mode, factory default or something? Then you could just insert a usb stick with the firmware and recover.
I came across this: http://www.aftvnews.com/how-to-unbri...mazon-fire-tv/
Comment