---------------------------------------------------------------------------------------------------------------------------------------------------------- All donations to Badcaps are welcome. Become a Badcaps supporter >>>>>click on this link to donate <<<<< Thanks to all supporters.
----------------------------------------------------------------------------------------------------------------------------------------------------------​
hp prodesk 400 g7 SFF bios password
need to remove bios password no luck rc unlocker only 32mb chip connected no 16mb chip. TIA...
serial #: 1CZ15203K6
Product #: 440F3PA#A2K
(9DH29AV)
try. it will enter in MPM mode, press F10 and you have a tab under "Main" named " set machine unique data" and you'll find all data on stickers of back of the bottom cover. to exit MPM mode use BCU 4.0 under windows or restart laptop how many times counter shows.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests
all donations are welcome,
see the donate button at the bottom of the page, or
>>>>>click on this link to donate via PayPal.<<<<<
Every donation made will go towards server fees and maintenance costs. ----------------------------------------------------------------------------------------------------------------------------------------------------------------------
try. it will enter in MPM mode, press F10 and you have a tab under "Main" named " set machine unique data" and you'll find all data on stickers of back of the bottom cover. to exit MPM mode use BCU 4.0 under windows or restart laptop how many times counter shows.
i try this one but tne unit blinkkiing wwhite aand red, no display the unit is good b4, but after flash this bin file the unit blinking
i try this one but tne unit blinkkiing wwhite aand red, no display the unit is good b4, but after flash this bin file the unit blinking
check contacts of bios chipset, it should work. apply a small pressure on wson8 chipset after heating it.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests
all donations are welcome,
see the donate button at the bottom of the page, or
>>>>>click on this link to donate via PayPal.<<<<<
Every donation made will go towards server fees and maintenance costs. ----------------------------------------------------------------------------------------------------------------------------------------------------------------------
Comment