Hi, hope someone can help diagnose a dell E5550,
Mobo LA - A911P Rev 1
which refuses to post.
When received, the laptop powered on, but gave a light code indicating ram issue. The ram and slot were cleaned, then ram re-seated.
Now laptop powers on with no error codes or beeps, but wont display to lcd or hdmi.
When a usb win10 installation stick is present at boot, there is no sign of power or communication with it.
I have the board out and have inspected components for obvious damage/liquid ingress but found none.
pl700 = 19.5v
PL701 =13.5V
these get warm, but not hot hot
processor grease was dried out and has now been re - pasted.
Fan spins high when on button held in for shut down.
pl101 3v and pl102 5v are present
pl200 1.35v present
pl500 2.04v
pl301 1.05v
Anything to check before pulling the bios chip?
Mobo LA - A911P Rev 1
which refuses to post.
When received, the laptop powered on, but gave a light code indicating ram issue. The ram and slot were cleaned, then ram re-seated.
Now laptop powers on with no error codes or beeps, but wont display to lcd or hdmi.
When a usb win10 installation stick is present at boot, there is no sign of power or communication with it.
I have the board out and have inspected components for obvious damage/liquid ingress but found none.
pl700 = 19.5v
PL701 =13.5V
these get warm, but not hot hot
processor grease was dried out and has now been re - pasted.
Fan spins high when on button held in for shut down.
pl101 3v and pl102 5v are present
pl200 1.35v present
pl500 2.04v
pl301 1.05v
Anything to check before pulling the bios chip?
Comment