hello, the power supply is in a working - not working state
if switched off the 12V are dropping to 3V before going to 12V again - when you have 12V you can hear a electronic noise and when the voltage drops the noise stops
the cycle repeats every 4-5 seconds
well if you press the power button at the time you have the 12V system can boot and work fine so with load the PSU can work
so far I have tested the capacitors at the 12V line
any suggestions?
if switched off the 12V are dropping to 3V before going to 12V again - when you have 12V you can hear a electronic noise and when the voltage drops the noise stops
the cycle repeats every 4-5 seconds
well if you press the power button at the time you have the 12V system can boot and work fine so with load the PSU can work
so far I have tested the capacitors at the 12V line
any suggestions?
Comment