Re: Software to analyze Video RAM faults on graphics cards?
This doesn't work for me![Facepalm](https://cdn.badcaps-static.com/images/smilies/facepalm.gif)
I used the disk genius and restored the partitions to a 320Gb HD - all that went OK but when I put the drive on my GPU test rig and boot from it, I don't get the screen shown in the video - I get a load of gobbledegook
First lines are
[firmware bug] TSC_DEADLINE disabled due to Errata: please update microcode to version 0x22 (or later)
acpiphp_ibm: ibm_acpi_init: acpi_walk_namespace failed
Booting TinyLinux 20.10
Error: initrd version 20.10 does not match TinyLinux version 18.07
The first error - please update microcode - I can google and it tells me to update my BIOS but I already have the latest BIOS Gigabyte GA-B85M-HD3 BIOS version F12
I found this link regards this error - the only solution I seem able to do is the first one
https://linuxpip.org/fix-tsc-deadline-error/
Solution 1: The BIOS is up to date
Solution 2: I tried SHIFT and ESC. I get a different text screen but it still has the TSC_DEADLINE error at the top. It also says 'failed to map register memory space' and 'service commands failed to start'. This means nothing to me unfortunately. What does a GRUB screen look like anyway?
Solution 3.
Doesn't work. I don't know much about Linux, but cd /etc takes me to the etc folder. However using 'ls' command in etc shows there is no dierctory called apt and no file called sources.list
If I type sudo apt install intel-microcode it says
sudo:apt: command not found
Solution 4: does not seem to apply to my situation
Solution 5: as far as I can tell the RTC is set correctly
The other two errors I googled but didn't really find anything useful.
It really annoys me when I find a help page for a problem and in itself the help page just presents me with more problems!!! GRRRRRR![Lolsign](https://cdn.badcaps-static.com/images/smilies/lolsign.gif)
![Lolsign](https://cdn.badcaps-static.com/images/smilies/lolsign.gif)
![Lolsign](https://cdn.badcaps-static.com/images/smilies/lolsign.gif)
OK OK it is probably me that is in error and not the downloaded images. So what am I doing wrong here? And why isn't the answer to that obvious from the so called help pages? And you would think the creator of the video might have mentioned some of this stuff...
This doesn't work for me
![Facepalm](https://cdn.badcaps-static.com/images/smilies/facepalm.gif)
I used the disk genius and restored the partitions to a 320Gb HD - all that went OK but when I put the drive on my GPU test rig and boot from it, I don't get the screen shown in the video - I get a load of gobbledegook
First lines are
[firmware bug] TSC_DEADLINE disabled due to Errata: please update microcode to version 0x22 (or later)
acpiphp_ibm: ibm_acpi_init: acpi_walk_namespace failed
Booting TinyLinux 20.10
Error: initrd version 20.10 does not match TinyLinux version 18.07
The first error - please update microcode - I can google and it tells me to update my BIOS but I already have the latest BIOS Gigabyte GA-B85M-HD3 BIOS version F12
I found this link regards this error - the only solution I seem able to do is the first one
https://linuxpip.org/fix-tsc-deadline-error/
Solution 1: The BIOS is up to date
Solution 2: I tried SHIFT and ESC. I get a different text screen but it still has the TSC_DEADLINE error at the top. It also says 'failed to map register memory space' and 'service commands failed to start'. This means nothing to me unfortunately. What does a GRUB screen look like anyway?
Solution 3.
Doesn't work. I don't know much about Linux, but cd /etc takes me to the etc folder. However using 'ls' command in etc shows there is no dierctory called apt and no file called sources.list
If I type sudo apt install intel-microcode it says
sudo:apt: command not found
Solution 4: does not seem to apply to my situation
Solution 5: as far as I can tell the RTC is set correctly
The other two errors I googled but didn't really find anything useful.
It really annoys me when I find a help page for a problem and in itself the help page just presents me with more problems!!! GRRRRRR
![Lolsign](https://cdn.badcaps-static.com/images/smilies/lolsign.gif)
![Lolsign](https://cdn.badcaps-static.com/images/smilies/lolsign.gif)
![Lolsign](https://cdn.badcaps-static.com/images/smilies/lolsign.gif)
OK OK it is probably me that is in error and not the downloaded images. So what am I doing wrong here? And why isn't the answer to that obvious from the so called help pages? And you would think the creator of the video might have mentioned some of this stuff...
Comment