Shuttle SG31G2 BAD TK

[BigTroll]

so i had one bulged TK cap 6.3 1800UF i replaced all TKs with 6.3 1800uf used Panasonic FCs, is that a decent enought replacement?

[c_hegge]

Re: Shuttle SG31G2 BAD TK

Nope. Use at least panny FM or FR. Ideally, something equivilant to FJ should be used (eg. Nichicon HM or HN)

[momaka]

Re: Shuttle SG31G2 BAD TK

Nope. Use at least panny FM or FR. Ideally, something equivilant to FJ should be used (eg. Nichicon HM or HN)

+1
Depending on where those TK caps are located (that is, if you can't find a datasheet for their series and have no idea on replacements), some spots may be satisfied even with Chemicon KZE or equivalent. CPU VRM low side - probably not.

@ BigTroll: for someone who's been on BCN for so long, you should know better by now to post more info/details when asking for any cap-related advice like this .

[Pentium4]

Re: Shuttle SG31G2 BAD TK

What series were the Tk, ATWY?

[c_hegge]

Re: Shuttle SG31G2 BAD TK

@ BigTroll: for someone who's been on BCN for so long, you should know better by now to post more info/details when asking for any cap-related advice like this .

I think he might just be living up to his name

[BigTroll]

Re: Shuttle SG31G2 BAD TK

unfortunately I threw away the TKs so i don't know what series. but the way i look at it, I have salvaged many dell 270 280 boards at the school and all the caps behind the cpu if they were panasonic FCs I never once saw a 1800uf 6.3 bloat or fail, however the ones that had 1800uf rubycon mcz or mbz would fail from time to time. and since they are near the cpu area I figuere of these panasonics can handle a dell 270 then they can handle my shuttle, Its had no problems since i put on the panasonics. I know they are low esr, just not as low as the FM series i guess.

[BigTroll]

Re: Shuttle SG31G2 BAD TK

oopps, i went though my spare cap pile and now I think I actually put in panasonic FL I will check when i get home.

[BigTroll]

Re: Shuttle SG31G2 BAD TK

Confirmed they are panasonic fl so they should be okay!

[c_hegge]

Re: Shuttle SG31G2 BAD TK

Yup. FL will be fine.

[BigTroll]

Re: Shuttle SG31G2 BAD TK

Yup. FL will be fine.

Nice I had a brain fart there not sure why I thought it was FC now I got a 4670 card coming in the mail for it and she runs mint Linux 16 nicely

[BigTroll]

Re: Shuttle SG31G2 BAD TK

Just wanted to give you guys an update the shuttle is running like a champ, I image inside each panasonic FL is a BIG V8 engine just working away to feed that little e8200 Core 2 cpu and yesterday my 4670 arrived so now its running like a champ with Mint linux 16, oh it did eat a power supply it was a ELAN Power RP 2005 00 load with CAPXON however i got a 250 watt shuttle PC40 its much quieter and has 2 fans. lets see how she holds up.

[momaka]

Re: Shuttle SG31G2 BAD TK

Confirmed they are panasonic fl so they should be okay!

Panasonic FL definitely sounds more like it. This is probably what you saw in those Dell GX-270 and GX-280 PCs as well. FC would be inadequate. In fact, I don't even think FC can be found @ 6.3V 1800 uF in a 8 mm can size.

Also, if there are any Ost caps in that Shuttle PC of yours, get rid of them NOW. Or else, you might be looking, at best, at another recap in the future. Worst case, they might take out the NB VRM or some other VRM (I'm not familiar with this particular Shuttle model) - at least that's what happened to my SB83G5 motherboard. When that happened, the NB died too. If you are feeling lazy, then at least replace just the caps on all of the buck regulators.

[BigTroll]

Re: Shuttle SG31G2 BAD TK

Just put in a QX6700 into same shuttle got the chip for only $15, shuttle is still running great.

[Th3_uN1Qu3]

Re: Shuttle SG31G2 BAD TK

QX6700 for $15? I want some of what you're smoking... Oh wait, it's no longer 2009. Still a good performer, especially for the price.

[BigTroll]

Re: Shuttle SG31G2 BAD TK

hehe thanks, the only bad thing is the shuttle wont let me change the multi despite being a unlocked chip, either way they run pretty hot so stock it says.