17MB82_V.0.8.4_Core_Update
This was retrieved from a posting on this site.
This was retrieved from a posting on this site.
-
Willing to help but I'm no expert. -
Re: Eeprom dump thread!
Great Idea this..
Got a few spi dumps for the following brands and models..Don't have full board or panel info on most, but It maybe just worth giving it a go...Comment
-
Re: Eeprom dump thread!
please dump for Nikai NTV3272LED6 or service code.Comment
-
Re: Eeprom dump thread!
Does anyone have a dump for a Polaroid SSDV2311-I1-D0?
The chip is a
[CODE][/
AE1445
25G64BSIG
E5N896CODE]
If I read the current contents, would someone be able to advise if the firmware is intact or corrupt?Comment
-
Re: Eeprom dump thread!
Can someone make a guide on reading/dumping/saving and then creating new eeproms and what hardware is needed? I'm sure if I knew a little more about it I'd have quite a collection of good ones..Comment
-
Re: Eeprom dump thread!
https://www.youtube.com/watch?v=Qy8fh-g5DOM
simple video showing how you do it.Comment
-
Re: Eeprom dump thread!
Bush 40bmk tp.sis231.p83 c13116 lsc400hm06Comment
-
Re: Eeprom dump thread!
this works with most 40" models using this board
tp.msd309.bp710.zipComment
-
Re: Eeprom dump thread!
please dump for Toshiba 48L1433DG or service code.
ThanksComment
-
Re: Eeprom dump thread!
Submitted by fpatrice2008
Toshiba:...............48L3433DG
Main board............17Mb95S-1
Panel:..................VES480UNVS-M01
EEPROM:..............MX25L1606E
IC:......................U10Last edited by dick_barton; 04-15-2017, 04:19 AM.Willing to help but I'm no expert.Comment
-
Re: Eeprom dump thread!
Hy,
It's mboot.bin file of the TV TOSHIBA copy with CH341A (MX25L1606E)
My TV TOSHIBA is 48L1433DG
panel VES480UNVS-M01
But my firmware is corrupt, don't found it.Comment
-
Re: Eeprom dump thread!
Posted to site by Diff
Seiki SE32HY01UK firmware
Main board...............TP.SIS231.PT751
EEPROM U5...............25Q64BSIGWilling to help but I'm no expert.Comment
-
Re: Eeprom dump thread!
Technika
lcd46-270
w46/57g-gb-3b-ftvu-uk
t.msd306.68a 12023
u10
lta460hm03Comment
-
Re: Eeprom dump thread!
Technika
lcd40-270
t.msd306.68a
u10
lta400hm07Comment
-
Re: Eeprom dump thread!
Is there a way to read with chip still on board?I assume no responsibility for any stupid suggestions I might post.Comment
-
Re: Eeprom dump thread!
Model: Baird TI5509DLEDBH
BOARD: T.S512.81
ID: U2
IC: 25Q64C
Panel:HK55OWLEDM-EH93HComment
-
Re: Eeprom dump thread!
Bush LCD40883F1080P
MB:17MB62-2
this works with most 40" using this board.Last edited by Hamie; 05-07-2017, 12:20 PM.Comment
-
Re: Eeprom dump thread!
SONY
Model: KDL-32S5600
Chassis/Version: EX-2N Peppermint_AVC
Panel: LTY320HA03 A02
T-CON: FS_HBC2L V3.0
Inverter (backlight): LJ63-06393A // SSI320_8C01 Rev:0.2
PWM Inverter: OZ9972ASN
MOSFET Inverter: MDD1752
Power Supply (PSU): PSC10265H M G2BS
PWM Power: SSC9503, STR-A6079M, PS2561
MainBoard: 1-878-999-11 - A-1641-831-A
IC MainBoard: PNX85433EH/M2/2008C, NAND512W3A2CN6F, EDE5116AJBG, M25P10, M24C64TDA9995HL, M24C64, TDA10048HN, 74LVC245APW
Тuner: ENG37E10KF
I upload NAND, SPI FLASH, EEPROM /all work perfect/Comment
-
Hello, This might be a long shot, but I'm looking for an EEPROM dump for a HP Photosmart C4280 All-in-one printer.
The printer seems to be in cartridge alignment mode. Sometimes it print the alignment page and then hangs during the scanning step, sometimes it hangs during the printing process and sometimes it hangs during the boot process. If I let it idle for a while then it flashes the back-light of the top screen and there's a letter E. Bottom screen is asking me to restart it to no avail. I have to remove the power cable from the printer for a couple of minutes to make it work...02-17-2022, 09:09 PM -
Good day to every one,
I have AVR 171 the IC1504 (24C32) eeprom is corrupted not able to read.
Does anybody have an eeprom dump file? I really appreciate any help.
Thanks in advance.07-01-2024, 09:04 PM -
P14s Gen 2
HT4B0/HP4B0/HT5B1/HT4B2
NM-D352 Rev 1.0
sn PF-35P15W
Requesting thunderbolt dump
also attached is the tbt dump. I extracted the bin from the cap file and modified it, not sure if it's correct. also didnt work.... -
Hi
I was working all day on a 42" with no backlight = Driver is bad . LED Tester. Image exists
As I was reassembling, I discovered faults on the screen ( used the LED Tester to power the strips).
Right distribution board, 2 Flexs, near them:
The one near the center has 1" line on screen. Pressing on the board-side or Panel side of the Flex bonding place results in some change, I sensed heating one time, but main fault line remains
The other, pressing on the Panel to the Chassey and the lines disappears 99.99%
I... -
Comment