hp pavilion 14-n007ax bios

[smali]

any one please bin bios file for...
hp pavilion 14-n007ax
DA0U93MB6D0 REV D

HELP PLEASE

[ala_borbe]

dump your old bios and save or post here

there are 2 ver in official bios updates in hp website

exact version can be determined by looking in dump by hex editor

[smali]

Originally Posted by ala_borbe

dump your old bios and save or post here

there are 2 ver in official bios updates in hp website

exact version can be determined by looking in dump by hex editor

Thanks for your response,
The old dump is not available because the chip write with wrong file by a technician, and didn't backup the original.

[ala_borbe]

one of files above should work, but you will have to fix dmi data with that odd hp tool

[smali]

i test the both files but did not work,,,, the 3.3v is fluctuation on bios chip pin8,7,3 after pressing pwr switch like on/off may be chip faulty..what you suggest ?

[ala_borbe]

you have a working dump here, but i cannot download

http://********/viewtopic.php?f=53&t=5916&start=280

[nazrul145]

Check it.

[smali]

Originally Posted by nazrul145

check it.

thanks but did not work.

[smali]

Any one have working dump?...please

[smali]

Originally Posted by nazrul145

Check it.

after flashing this file now charging battery light on power on/off ok 3v, 5v, 1.5v,1.8v,.8v on cpu 02 coil are ok but no display the missing voltage are on two coil one which is driving by ic ADP3211 i think this is GPU voltage is missing .
the key board Caps-lock light is blinking and wifi red light is continuously on.
so what you experts are advise and i have no schismatic for this,if any one have please share.

[dj_ricoh]

How many blinks?

[smali]

Originally Posted by dj_ricoh

How many blinks?

continuously

[ala_borbe]

@smali
with my bios files it would not turn on at all? corect?

@nazrul145
did your file came from dump read from laptop or web update
comparing your file with mine only 100 first bytes are different, rest of file is the same, but those first 100 bytes are DMI data that should be fixed with HP tool

you can try mu new files if you like
there are two versions of bios, probably UMA and DISCRETE... if you flash discrete bios to uma it will blink error for vga cos uma is integrated hence it could not be detected... those may be your blink codes

[smali]

Dear ala_borbe,
first of all i am very thankful of you on the cooperation.
According to your first provided bios file are ok but that was my fault when i flashed your bios file i check the laptop on adopter only and not connected the battery , so the voltage were fluctuating on only adopter without battery.
but when i connected the battery with adopter the result as i said in my previous post.....
"charging battery light on power on/off ok 3v, 5v, 1.5v,1.8v,.8v on cpu 02 coil are ok but no display the missing voltage are on two coil one which is driving by ic ADP3211 i think this is GPU voltage is missing" and also FAN spinning fan continuously.
Now the result are same of yours both bios file 02169F16 and the nazrul145.
i also write 0216Df16 but it is very abnormal compare to the 02169F16.

[ala_borbe]

ok, thx for info
problem you have is not bios related

[smali]

@ ala_brob..can post the link hp offical site for bios?please

[ala_borbe]

http://h10025.www1.hp.com/ewfrf/wc/s...oduct=5450114&

choose os and scroll down to bios section


sp69882.exe is the file you need

[makina1982]

please hp 14 DA0U93MB6D0 REV D Bios
Thanks

[Nadeem Amin]

Thank

[angel-boy]

i have a problem with DA0U93MB6D0 REV : D

plug in adapter, no orange light for charging , and no white light , power the bord, no image, fan not spinning.

bios problem ?