VIZIO D60-F3 Wont Power ON, No Standby, No Picture, No Sound

[rebelkustoms]

Re: VIZIO D60-F3 Wont Power ON, No Standby, No Picture, No Sound

Final bump on this before I order a PS.

[nomoresonys]

Re: VIZIO D60-F3 Wont Power ON, No Standby, No Picture, No Sound

At 20-30 bucks on ebay, certainly worth a shot, for a 60 inch tv.

[rebelkustoms]

Re: VIZIO D60-F3 Wont Power ON, No Standby, No Picture, No Sound

Picked up a Power Board for this set. Got it all plugged up and it is still dead/no ready light wont turn on etc. However I DO have voltage at the board if I unplug the main board from the power supply. Here is what I get.
Pins:
Pin 1 - Pin 10 show 0v.
Pin 11 - 16.25v
Pin 12 - 4.3v
Pin 13- 0v
Pin 14 - 16v
Pin 15 - 16v

[budm]

Re: VIZIO D60-F3 Wont Power ON, No Standby, No Picture, No Sound

Picked up a Power Board for this set. Got it all plugged up and it is still dead/no ready light wont turn on etc. However I DO have voltage at the board if I unplug the main board from the power supply. Here is what I get.
Pins:
Pin 1 - Pin 10 show 0v.
Pin 11 - 16.25v
Pin 12 - 4.3v
Pin 13- 0v PS-ON
Pin 14 - 16v
Pin 15 - 16v

So yo are not getting PS-ON when all the boards are connected, correct?
and since you do not get any LED indicator on the front panel of the TV either so there is something going on with the main board. Do you see any red light on the Optical port of the main board?

[rebelkustoms]

Re: VIZIO D60-F3 Wont Power ON, No Standby, No Picture, No Sound

So yo are not getting PS-ON when all the boards are connected, correct?
and since you do not get any LED indicator on the front panel of the TV either so there is something going on with the main board. Do you see any red light on the Optical port of the main board?

Correct I get no voltage on any of the pins with the main board connected. I see no red light on the optical port I turned off the room lights and put power to the TV and I cant see any light. Here is a pic of the board.

[R_J]

Re: VIZIO D60-F3 Wont Power ON, No Standby, No Picture, No Sound

Did you check shopjimmy, depending on the serial number they might have the set of 3 boards.

[rebelkustoms]

Re: VIZIO D60-F3 Wont Power ON, No Standby, No Picture, No Sound

Did you check shopjimmy, depending on the serial number they might have the set of 3 boards.

SJ out of stock for every board for this model.

[rebelkustoms]

Re: VIZIO D60-F3 Wont Power ON, No Standby, No Picture, No Sound

Update on this. I have gotten a new power supply as mentioned earlier and I just received my new main board it was a used model from ebay. I am getting voltages on the power supply and at the main board with the new one plugged in now but this replacement has no ready light no optical light and does nothing. How do I rule out anything else before I contact the seller and tell them I believe I have a dead board?