Announcement

Collapse
No announcement yet.

TNPA5608 panasonic PSU dead

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    TNPA5608 panasonic PSU dead

    hello,

    make new thread to discuss about psu issue
    on same tv panasonic 42E5 series, that take storm lightning and motherboard fried
    the PSU not works, got 325 on big cap primary section
    no other stable voltage, on primary mosfet i have got 325V on drain, 0V on source and gate
    the voltage near ic 730 are unstable too
    not find shorted cap
    the only thing i find strange on this is only 130 on diode mode on d7211 in both ways (the diode is ok desoldered)
    burnt area near primary mosfet , replace it but no fix

    what can i chekc now please ?

    thank you

    #2
    Re: TNPA5608 panasonic PSU dead

    the critical points at Panasonic TNPA5608 are the PFC Control IC if i remember correct ic7201 with 8 pins

    Comment


      #3
      Re: TNPA5608 panasonic PSU dead

      ok thank you i'll check that

      Comment

      Working...
      X