Hi,
Have a storm damaged TV that had a short on the power to IC207 a tiny surface mount near the emmc that still remains after I removed the IC207.
So I got a new mainboard from aliexpress and it all works but I'm wondering if there's a way to transfer calibration data from the old board to the new one or if that's even necessary?
I presume there is some sort of calibration done at the factory??
There are 2 winbond flash ics w25q40cl, w25q80dv and another eeprom 24c512cl.
I tried swapping those to the new board but the TV wouldn't boot. The new board does have a different tuner though.
Does anyone know where the panel calibration data is stored?
Thanks.
Have a storm damaged TV that had a short on the power to IC207 a tiny surface mount near the emmc that still remains after I removed the IC207.
So I got a new mainboard from aliexpress and it all works but I'm wondering if there's a way to transfer calibration data from the old board to the new one or if that's even necessary?
I presume there is some sort of calibration done at the factory??
There are 2 winbond flash ics w25q40cl, w25q80dv and another eeprom 24c512cl.
I tried swapping those to the new board but the TV wouldn't boot. The new board does have a different tuner though.
Does anyone know where the panel calibration data is stored?
Thanks.
Comment