Have this little tv seems to be stuck in hospital mode, only have universal remotes, just trying to get it in regular tv mode or at least get the hdmi working, when pressing input button on tv it just goes bank 1,2,3,4, hdmi never shows as an option. Yep I have been too dumb to figure it out so far.
22LG3DDH stuck in hospital/hotel mode
Collapse
X
-
Tags: None
-
Re: 22LG3DDH stuck in hospital/hotel mode
Thanks Diah, system lock is off, it's an oldie from 2010, doesn't seem to have wifi, don't I need wifi on both tv and phone to work the in_stop?Comment
-
Re: 22LG3DDH stuck in hospital/hotel mode
no need to any wifi or lan.. IN_STOP should be send via IR sender.. so mobile with IR will do the job. if not you need to DIY one Ir with headphone jack to play wave file.
EDIT: BTW the old LG from 2010 will have reset puttom close to AV In as i rememberComment
-
Re: 22LG3DDH stuck in hospital/hotel mode
yes, I saw that reset button previously and tried it, held it for 30 seconds but no joy. Wonder if that button is suppose to put it back to factory?Comment
-
Re: 22LG3DDH stuck in hospital/hotel mode
In the service manual, the reset button is just a manual reset, this reset normally happens when you plug in the tv
If 0000 did not work, try 0413 or 1105 (the hotel etc. may have set their own code)
There are a few other options here https://theconchtech.com/smart-tv/lg...ithout-remote/Last edited by R_J; 05-30-2022, 05:17 PM.Comment
-
Re: 22LG3DDH stuck in hospital/hotel mode
I did previously get into ez-adjust menu with 0413 but I didn't see anything in there to turn off hotel mode.Comment
-
Re: 22LG3DDH stuck in hospital/hotel mode
this is in the easy adjust menu when opened with 0413: http://beau.org/~jmorris/linux/lg-hacking/ez-adjust.txtComment
-
Re: 22LG3DDH stuck in hospital/hotel mode
Maybe the instructions will help
Mode Setup GuideAttached FilesComment
-
Re: 22LG3DDH stuck in hospital/hotel mode
since you are able to call EZ_Adj then you can send IN_STOP for hard reset ( shipping condition ) and IN_START for turn on or off future and option.. all will use same code as you did before 0-4-1-3Comment
-
Re: 22LG3DDH stuck in hospital/hotel mode
trying to get a diy rf blaster working with amazon hd 10, tried lean remote, keeps saying your phone isn't rf blaster capable, do any of the remote apps work right except anymote, which is not free?Comment
-
Re: 22LG3DDH stuck in hospital/hotel mode
Only getting the screens in the link in post #8, Don't think I can get it done from that ez-adjust menu, not seeing in_stop, looks like only a service remote will do it.Comment
-
Re: 22LG3DDH stuck in hospital/hotel mode
IN_Start after code it will show you optiones of service menu.Comment
-
Re: 22LG3DDH stuck in hospital/hotel mode
no worries they're only 8 bucks, I just don't want to add to my dusty collection of very seldom used crap.Comment
-
Re: 22LG3DDH stuck in hospital/hotel mode
I have a supplier in Italy that manufactures blank remotes of which they get programmed via a device on a USB port. You can use the remote to set it up for almost any tv out there.
I have got one step further with the lads from Superior Remotes and they sent me a infra red reader. I now capture remote codes from remotes that I want cloned and I email it to them. They then make it available on their database so that I can clone the remotes using their blank units.
This way I came across the LG service remote of which I immediately made a copy and wow, i know don't have to struggle with a WAV file and a infra red wire connected to the laptops audio out socket to transmit the bit pattern that corresponds to IN-START etc.
I now have my own service remote and stuff all LG agents who would not sell me one, those bustitches.....
Hope you understand.Comment
-
Comment
-
Re: 22LG3DDH stuck in hospital/hotel mode
ok, I see what you mean, that would be much easier than messing with wav and laptops and diy blasters.Comment
Related Topics
Collapse
-
by modtoolDear colleagues,
I've entered the repair of the chromebook machines just one month ago and I've found some significant differences from the classic laptops or macbooks, so I'm searching some advices.
The owner of this chromebook gave it to me after it has been left flooded by water for almost a week, so chances of repair were not so high, the mainboard was oxidyzed in many spots but I made a nice cleaning, resoldering and component replaging work and now it is almost working.
Among other things I've cleaned many spots from oxyds, reballed CPU, EMMC, EC, replaced...05-07-2025, 06:10 AM -
by grimacelordHello,
I have a CFI-1215A PS5 (EDM-030 board) here that won't boot normally. It currently will immediately boot into Safe Mode upon power button press with a screen that says "Processing" and then a progress bar that usually begins around 75-84% and slowly climbs up to 99% where it will hang forever. The console will not ever escape past the 99% mark.
Things I have tried:
1. Tried force booting into Safe Mode by pressing and holding power button for 2 beeps so I could use a reinstallation USB, but the console still boots into Safe Mode with the... -
by bseinfoHi everyone,
I have a Brother MFC-J480DW printer stuck in maintenance mode (BHL2 USB Maintenance). The screen only shows white bars, and it’s completely unresponsive. The official Firmware Update Tool doesn’t detect it, and I’ve tried multiple versions.
I’m looking for the raw firmware file LZ5313_L.blf (or .djf), compatible with FILEDG32.exe, so I can attempt a manual recovery.
If anyone has a full dump of this model (or a compatible one like MFC-J485DW or J885DW), or knows a private Discord or Telegram group where this kind of firmware is shared,...Today, 10:53 AM -
by OmronHello Guys! I have trouble with my car radio Kenwood KDC 3051G I hope someone more knowledgeable can help me, I tried everything in my power that I stumbled upon online.
My radio is permanently in demo mode, it says Press Volume Knot Cancel Demo and when I press it nothing happens.
- Tried to unplug radio and plug it back in into power,
- Tried to reset radio by holding reset button key for 5,10,30 seconds while in power and without power, plugging it back in, it wouldn't work.
- Tried to hold 3,6 while turning it back on and then pressing 1,2...-
Channel: Troubleshooting Audio Equipment
-
-
by DynaxSCHi,
I have this board, where I have exchanged the LGA1151 socket. During testing I discovered, that the large PCIEX16 slot won't by no force work in x16 mode, but keeps to work in x8 mode only.
I tested this with GPU-Z, also with Render Test (but tried also Furmark and Heaven Benchmark - no effect).
Tested on Core i5-9600K as well as on an Pentium G5420 and MSI NVIDIA GTX1070 and 2 other cards, including RTX3060Ti.
Board architecture definitely allows x16 mode, as all 16 PCIe lanes are present between CPU and main GPU slot (nearest to CPU).
...05-04-2025, 12:08 PM - Loading...
- No more items.
Comment