Recently picked up a Sanyo DP55441. Set has a few issues:
1. When I turn it on, I always have to select either "Store" or "Home" on the menu (see attachment).
2. It forgets which input I was using last, so I have to change the input setting everytime.
3. The controls for Brightness, Contrast, Saturation, Hue and Sharpness are not available from the menu (see attachment).
Besides these issues the set works good, no other issues that I know of.
I am thinking all three are related and its probably the main board. I have looked at the main board and the power board, but see no visible damage.
Any ideas?
Thanks
1. When I turn it on, I always have to select either "Store" or "Home" on the menu (see attachment).
2. It forgets which input I was using last, so I have to change the input setting everytime.
3. The controls for Brightness, Contrast, Saturation, Hue and Sharpness are not available from the menu (see attachment).
Besides these issues the set works good, no other issues that I know of.
I am thinking all three are related and its probably the main board. I have looked at the main board and the power board, but see no visible damage.
Any ideas?
Thanks
Comment