Badcaps.net Forum
Go Back   Badcaps Forums > General Topics > General Capacitor Questions & Issues
Register FAQ Calendar Search Today's Posts Mark Forums Read

 
Thread Tools Display Modes
Old 05-29-2023, 07:26 AM   #1
GEARELECTRONICS
New Member
 
Join Date: Apr 2019
City & State: victoria mahe
My Country: seychelles
Line Voltage: 240
I'm a: Knowledge Seeker
Posts: 13
Default Samxon capacitor esr

Hi all,
I need your advice.
-SAMXON 2200uf 50V tested 0.00 esr on Dick Smith Blue Esr meter and 2027 ohm on FLUKE 179 multimeter.
-Is this esr reading realistic?
Thank you
GEARELECTRONICS is offline   Reply With Quote
Old 05-29-2023, 07:45 AM   #2
stj
Great Sage 齊天大聖
 
stj's Avatar
 
Join Date: Dec 2009
City & State: Europe
My Country: some shithole run by Israeli agents
I'm a: Professional Tech
Posts: 29,107
Default Re: Samxon capacitor esr

no,
the fluke cant read esr, esr is done using AC current.
the fluke is telling you the cap has internal leakage

if you read capacitance it will probably be well over what it should be.
stj is offline   Reply With Quote
Old 05-29-2023, 01:29 PM   #3
redwire
Badcaps Veteran
 
Join Date: Dec 2010
City & State: Alberta
My Country: Canada
Posts: 3,245
Default Re: Samxon capacitor esr

Typical 2,200uF 50V cap has ESR from around 0.264Ω-0.030Ω for low ESR types.
If the cap has 40V on it with 2,207 ohms leakage... that is 0.8W which is a problem.

Check your Blue ESR meter is working using a resistor, like 1Ω or 0.5Ω
It does not use AC, but instead a DC pulse of 0.5mA, 5.0mA or 50mA depending on range.

I have trouble testing with these cheap Asian caps, the electrolyte acts like a lead-acid battery lol then you add corrosion.
High leakage current and you need an AC test (dual slope) to measure capacitance. I'm not sure what the Fluke 179 is doing, the 87-V is single slope I thought.
redwire is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Badcaps.net Technical Forums 2003 - 2023
Powered by vBulletin ®
Copyright ©2000 - 2023, Jelsoft Enterprises Ltd.
All times are GMT -6. The time now is 08:21 PM.
Did you find this forum helpful?