The Hall of Shame - Badcaps Photo Montage - Page 40

**PeteS in CA** · 05-10-2017, 01:43 PM

Yeah, abusing the @#$% out of even the very parts will shorten their lives considerably. Muahhh ha ha ha!

**RukyCon** · 05-10-2017, 04:05 PM

The power supply is almost as bad as the mobo.

**RukyCon** · 05-17-2017, 02:54 AM

Found this in a DVD player's power supply, seems to test at 0.17Ω. [Basically a dead short.]

**PeteS in CA** · 05-17-2017, 04:10 PM

The logo is Samsung.

**RukyCon** · 05-17-2017, 04:22 PM

Quote:

Originally Posted by PeteS in CA

The logo is Samsung.

I thought it was a samsung.

**Behemot** · 05-20-2017, 06:12 AM

Is it a short also with ordinary multimeter?

**RukyCon** · 05-20-2017, 06:20 AM

It tests 3.7Ω on my multimeter so i say maybe.

**Behemot** · 05-20-2017, 07:32 AM

Yeah that would be, considering the resistance of the leads…

**momaka** · 05-21-2017, 07:40 PM

Quote:

Originally Posted by PeteS in CA

The logo is Samsung.

Indeed it is.

Strangely enough, I have some green Samsung caps (SS series?) manufactured in the mid-90's that also went short-circuit when I tried to re-use them on my projects breadboard. Some went short-circuit even when I tried to reform them. And some are still doing okay and show normal ESR and capacitance.

I guess Samsung aren't the best of caps either.

**goontron** · 05-21-2017, 09:48 PM

Quote:

Originally Posted by momaka

i guess samsung aren't the best.

ftfy

**Behemot** · 05-21-2017, 10:03 PM

Also got a small bag of them, already re-used couple dozen small ones, all hold fine

**RukyCon** · 05-22-2017, 05:16 AM

Dead CapXon's in a HP PSU.

**RukyCon** · 05-23-2017, 12:00 AM

Here are some capacitors i found recently.
#1 Samcon 1000uf 16v from a audiovox radio.

#2 Sammi capacitors from the same audiovox radio.

#3 ZHN capacitor from a DVD player power supply.

#4 JICON 22uf 250v capacitor from a philips DVD player.

And #5 YEC 4700uf 16v capacitor from a unknown radio.

I have some more weird capacitors that i found but i feel like i'm at a point where if i keep posting photos to here too often people will think i'm spamming the thread.

I don't know, what do you think.

**momaka** · 05-23-2017, 05:48 AM

Nothing wrong with posting pics of unknown, dodgy capacitors brands. Most likely, they are crap. That said however, were they failed? If not, then I wouldn't put them in this thread. The Hall of Shame thread is mainly for pics of capacitors that have failed (either visibly or an ESR/leakage/capacitance meter test.)

You could, however, add them to the thread, "List of Bad Cap Manufacturers"

.

**Wester547** · 05-23-2017, 08:32 AM

Quote:

Originally Posted by ruky con

Dead CapXon's in a HP PSU.

CapXon was still junk as of 8 years ago. What a surprise.

Quote:

Originally Posted by momaka

Those KZG caps next to then don't look that much better either

The server probably ran pretty hot to cook those Rubycon caps. I've only seen MCZ fail in locations where they were exposed to heat. That bare Intel chipset does typically run quite hot.

It doesn't take long-term exposure to excessive heat for a MCZ (or MFZ) to bulge. That said, at least MCZ doesn't fail of its own accord like KZG and KZJ do.

Quote:

Originally Posted by ruky con

The power supply is almost as bad as the mobo.

Of course LTEC would bulge in a server supply. I don't imagine the neighboring Teapo are in better condition regardless of physical appearance.

As to adding those brands to the list of bad cap manufacturers thread... I would discard YEC regardless of its appearance. I've very rarely happened upon a YEC that ever measured to spec and back in the day, YEC was known as one of the absolute worst capacitor brands ever. So bad that they were guaranteed to bulge on unused Netvista motherboards (and every single one at that). So I'm of the opinion that YEC belongs in this thread irrespective of physical state.

I suppose I should contribute to this thread as well.

Bad G-Luxon and bad KSC (yes, I know the lighting is terrible. I'm not a photographer).

**Wester547** · 05-23-2017, 05:38 PM

Sorry to double post. Here are better shots of the same failed caps.

**RukyCon** · 05-24-2017, 06:33 AM

Quote:

Originally Posted by Wester547

Of course LTEC would bulge in a server supply. I don't imagine the neighboring Teapo are in better condition regardless of physical appearance.

All of the teapo capacitors seem to test ok.

**Wester547** · 05-24-2017, 01:58 PM

All the Teapo were in-spec whilst measured out-of-circuit at room temperature? After 24/7 use in what appears to be a SFF (or regular size?) server PSU (probably OEMed by Hipro?)? It's a miracle!

I'd guess the non-bulging LTECs didn't fare very well.

**RukyCon** · 05-26-2017, 06:18 AM

Quote:

Originally Posted by Wester547

As to adding those brands to the list of bad cap manufacturers thread... I would discard YEC regardless of its appearance. I've very rarely happened upon a YEC that ever measured to spec and back in the day, YEC was known as one of the absolute worst capacitor brands ever. So bad that they were guaranteed to bulge on unused Netvista motherboards (and every single one at that). So I'm of the opinion that YEC belongs in this thread irrespective of physical state.

The capacitor is still good [in my opinion] testing at 5000uf with an ESR of .18Ω.

Just for fun, here's an X2 capacitor i got from eBay. It's a 100nf [0.1uf] that tests at 20nf.

The brand is SR.CAP..
Note: the capacitor is brand new so it should be 100nf.

**Per Hansson** · 05-26-2017, 07:00 AM

Quote:

Originally Posted by ruky con

The brand is SR.CAP..

They got the letters reversed, it should be: SCRAP!

05-10-2017, 01:43 PM	#781
PeteS in CA Badcaps Veteran Join Date: Aug 2005 City & State: San Jose, CA My Country: USA, Unsure of Planet Line Voltage: 120VAC, 60Hz & 115VAC, 400Hz I'm a: Professional Tech Posts: 3,504	Re: The Hall of Shame - Badcaps Photo Montage Yeah, abusing the @#$% out of even the very parts will shorten their lives considerably. Muahhh ha ha ha! __________________ PeteS in CA Power Supplies should be boring: No loud noises, no bright flashes, and no bad smells. ************************** To kill personal responsibility, initiative or success, punish it by taxing it. To encourage irresponsibility, improvidence, dependence and failure, reward it by subsidizing it. ************************** Anti-Covid-Vaxxer pig crap claim/prediction, Doctor: Heart Failure from mRNA Jabs "Will Kill Most People" \| Principia Scientific Intl. ; Dr. Geert Vanden Bossche Warns COVID-19 Jab Injuries and Deaths Will Soon "Collapse Our Health System" (VIDEO) ; Fully Vaxxed May 2021; Since that time I've done 13 5Ks, 1 8K, 12 10Ks, and 4 half marathons

05-17-2017, 04:10 PM	#784
PeteS in CA Badcaps Veteran Join Date: Aug 2005 City & State: San Jose, CA My Country: USA, Unsure of Planet Line Voltage: 120VAC, 60Hz & 115VAC, 400Hz I'm a: Professional Tech Posts: 3,504	Re: The Hall of Shame - Badcaps Photo Montage The logo is Samsung.

05-20-2017, 06:12 AM	#786
Behemot Badcaps Veteran Join Date: Dec 2009 City & State: Prague, 50°4'52.22"N, 14°23'30.45"E My Country: CZ Line Voltage: 230 V/50 Hz I'm a: Knowledge Seeker Posts: 4,774	Re: The Hall of Shame - Badcaps Photo Montage Is it a short also with ordinary multimeter? __________________ Less jewellery, more gold into electrotech industry! Half of the computer problems is caused by bad contacts Exclusive caps, meters and more! Hardware Insights - power supply reviews and more!

05-20-2017, 06:20 AM	#787
RukyCon A Fake Rubycon Join Date: Jan 2017 City & State: The Peoples Republic of California My Country: USA Line Voltage: Split-Phase 240VAC @ 60Hz I'm a: Knowledge Seeker Posts: 728	Re: The Hall of Shame - Badcaps Photo Montage It tests 3.7Ω on my multimeter so i say maybe.

05-20-2017, 07:32 AM	#788
Behemot Badcaps Veteran Join Date: Dec 2009 City & State: Prague, 50°4'52.22"N, 14°23'30.45"E My Country: CZ Line Voltage: 230 V/50 Hz I'm a: Knowledge Seeker Posts: 4,774	Re: The Hall of Shame - Badcaps Photo Montage Yeah that would be, considering the resistance of the leads…

05-21-2017, 10:03 PM	#791
Behemot Badcaps Veteran Join Date: Dec 2009 City & State: Prague, 50°4'52.22"N, 14°23'30.45"E My Country: CZ Line Voltage: 230 V/50 Hz I'm a: Knowledge Seeker Posts: 4,774	Re: The Hall of Shame - Badcaps Photo Montage Also got a small bag of them, already re-used couple dozen small ones, all hold fine

05-23-2017, 05:48 AM	#794
momaka master hoarder Join Date: May 2008 City & State: VA (NoVA) My Country: U.S.A. Line Voltage: 120 VAC, 60 Hz I'm a: Hobbyist Tech Posts: 11,243	Re: The Hall of Shame - Badcaps Photo Montage Nothing wrong with posting pics of unknown, dodgy capacitors brands. Most likely, they are crap. That said however, were they failed? If not, then I wouldn't put them in this thread. The Hall of Shame thread is mainly for pics of capacitors that have failed (either visibly or an ESR/leakage/capacitance meter test.) You could, however, add them to the thread, "List of Bad Cap Manufacturers" . Last edited by momaka; 05-23-2017 at 05:51 AM..

05-24-2017, 01:58 PM	#798
Wester547 - Join Date: Nov 2011 City & State: CA. My Country: USA. Line Voltage: 120-125VAC 60Hz. I'm a: Knowledge Seeker Posts: 1,267	Re: The Hall of Shame - Badcaps Photo Montage All the Teapo were in-spec whilst measured out-of-circuit at room temperature? After 24/7 use in what appears to be a SFF (or regular size?) server PSU (probably OEMed by Hipro?)? It's a miracle! I'd guess the non-bulging LTECs didn't fare very well.