Announcement

Collapse
No announcement yet.

Dlink Modems Firmware Dump Promblem

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Dlink Modems Firmware Dump Promblem

    Hi there


    I have 6 D-link modem in three different model 2700u,27430u and 2460u

    2700


    The problem is in each couple of those I have one working and one dead modem
    I read working modem bios/firmware and use this dump file to write on dead one's bios, but no chance and modem not even power up.

    when I change just EEPROM IC of 2 working D-Link modem but use original data they wont turn on but with their original hardware and DATA file they're ok.so i think there must be something that I not aware of something like saved IC identity somewhere

    but in other hardware like tp-link modem it's not an issue
    and i can use different EEPROM ic or different dumped file without any problem
    so what's the problem with D-Link modems?


    another question: how should I read data with JTAG pins?

    If you guys need any data , Bin file or dump Data or any image please let me know.
    Last edited by DBBJAF; 11-15-2020, 02:33 AM.

    #2
    Re: Dlink Modems Firmware Dump Promblem

    fist you need to bring the firmware back to what it was. Use a TTL to hook up to those pins. Try to clear the nvram and see what that gives.

    Comment

    Working...
    X