Frigidaire Refrigerator Model FFHS2612LS0 diodes

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • sam_sam_sam
    Badcaps Legend
    • Jul 2011
    • 6026
    • USA
    #21
    Re: Frigidaire Refrigerator Model FFHS2612LS0 diodes

    Originally posted by captainKKK
    I am not complaining about this fridge, after all it was purchased in 2005 and its not a daily problem. It just seems odd that at any moment, it can start peeing out the water dispenser and flooding the freezer with ice maker continuous over fill in the middle of the night because these diodes decide to give up the ghost.
    There is a know issue about this it has to do with a temperature sensor that failure to a closed position and it makes a mess in the freezer I replace a few them before or it the diode issue as well also there is an issue with the plastic gear that times the functions of the ice maker I have also replaced several of them as well

    I have also stopped fixing these issues and recommend replacing the ice maker and not repairing them because the repair does not always resolve the issue because it will probably return again
    Last edited by sam_sam_sam; 12-03-2022, 07:19 AM.

      Comment

      Previous 1 2 template Next

      Related Topics

      Collapse
      • DennisH
        Need Help Identifying This DIODE mounted on a Frigidaire oven control PN:316131600
        by DennisH
        This diode is mounted on a Frigidaire electronic oven control PN:316131600. This diode runs hot enough that the PCB is showing slight burn marks (black soot looking area on PCB above the diode). It looks to me to be coming from the body of the diode.

        The oven control is 22 years old and still works, but I can't get a new replacement, so I'm doing preventative maintenance and replacing a few parts on it that I think could fail - and this is one of them.

        Can any of you identify this diode (see pic) and suggest a replacement that can handle more heat - or if not, can...
        10-18-2022, 07:24 PM
      • caspian
        What Zener Diodes on a Linear Power Supply
        by caspian
        Dear members,

        I have a linear variable power supply with unknown brand name that I used for voltage injection.
        Then it failed. I discovered that its transistors (Q1 and Q2) are shorted.
        In addition, I discovered that its zener diodes are defective.
        I can replace the burned transistors.
        But I do not know the model of the zener diodes. the model number is not marked on the zener diodes.
        Therefore, I cannot replace the zener diodes.
        I do not want to test the zener diodes in a test circuit to discover their model or value.
        no schematics are available...
        05-26-2025, 12:38 PM
      • asr
        Finding replacement diode iPad Pro 3rd gen A1701
        by asr
        Hello, I am looking for help to replace a damaged diode. The tristar was replaced and a diode was damaged in the process. I have a picture of the diode but dont have an exact donor. I mostly have macbooks for donors and only a few ipad and iphone boards. Diode part number: DSF01S30SCAP
        Im not sure where to find the ipad board number. Anybody have an idea where else this diode is used on other boards? Thanks....
        07-09-2024, 06:24 PM
      • unimatrix93
        TV backlight zener diode
        by unimatrix93
        Hello everyone, I'm repairing an LG TV backlight and I noticed some strange behavior when I touching the backlight strip with a missing Zener diode.

        So I replaced the leds on the strips and they seemingly working fine, but soon as I touch the strip which has a missing Zener diode the whole backlight turns off for a few seconds and then turns back on.

        Is this caused by the missing diode? If so what kind of zener diode should I use to replace it?.
        ​​​​
        The led strips has 9 6V leds.


        ​​​
        1 Photo
        02-10-2025, 12:13 PM
      • NicRac
        monowheel repair,Is the diode the problem?
        by NicRac
        Hello everybody☺️ I am glad to be here and looking forward to a good discussion.

        First of all, I am new here. Therefore I will shortly introduce myself.
        I am Nico and currently I study Physics.
        In my freetime I like to build and repair stuff. Especially big battery's.

        A few years ago I got myself an electric unicycle, monowheel or however you call that.
        The battery bms was broken so I replaced and resolder that. Nothing big.
        I used this thing for some years and had a lot of fun. Unfortunately I used it last time in heavy rain. Usually everything...
        5 Photos
        07-26-2024, 06:13 AM
      • Loading...
      • No more items.
      Working...