Indesit IDC75 condenser dryer not stopping - Page 2

**notallbad** · 01-14-2023, 01:07 PM

Well decided to disassemble and as suspected the contact between A9 and A12 were welded shut, separated the connection, cleaned contacts and re-assembled. All good now!
The contact was the very last contact to be accessed so a full disassembly was required.

No amount of tapping would have freed it in this case but had already tried that, thanks

Thanks again for the help/advice, very much appreciated.

**stj** · 01-14-2023, 01:22 PM

not surprised, it really should have had a snubber across the contacts to prevent arcing

01-14-2023, 01:07 PM	#21
notallbad Badcaps Veteran Join Date: Oct 2012 City & State: UK My Country: UK I'm a: Knowledge Seeker Posts: 1,009	Re: Indesit IDC75 condenser dryer not stopping Well decided to disassemble and as suspected the contact between A9 and A12 were welded shut, separated the connection, cleaned contacts and re-assembled. All good now! The contact was the very last contact to be accessed so a full disassembly was required. No amount of tapping would have freed it in this case but had already tried that, thanks Thanks again for the help/advice, very much appreciated. Last edited by notallbad; 01-14-2023 at 01:17 PM..

01-14-2023, 01:22 PM	#22
stj Great Sage 齊天大聖 Join Date: Dec 2009 City & State: Europe My Country: some shithole run by Israeli agents I'm a: Professional Tech Posts: 28,106	Re: Indesit IDC75 condenser dryer not stopping not surprised, it really should have had a snubber across the contacts to prevent arcing

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode