Eeprom dump thread!

[Denis J]

Re: Eeprom dump thread!

try

Hello Lotas,
I finally took the time to copy the 2 firmwares
on the TV eeprom and everything went back in, the TV works again. I wanted to thank you a thousand times thank you

[Duranitron]

Re: Eeprom dump thread!

Need help guys.. need dump files of TCL- 43D2913D LED TV attached is the original bin files. thanks in advance..

[lotas]

Re: Eeprom dump thread!

Need help guys.. need dump files of TCL- 43D2913D LED TV attached is the original bin files. thanks in advance..

The software in the dump is fine, try with a clean eeprom.

[Duranitron]

Re: Eeprom dump thread!

The software in the dump is fine, try with a clean eeprom.

Thanks a lot...

[KYBOSH]

Re: Eeprom dump thread!

I jumping into the firmware dump game and wasted to see if I could find the dump for a Samsung UN55MU800. The board number is CY-SM055FLLV6H. The chip is a WINBOND 25Q32JVIG. I did a quick search on this thread but didn't see anything. Perhaps I am not searching for it correctly?

Thank you in advance!

I finally got around to getting the dump!

I the chip is a Winbond 25Q32JVIG but that chip is not specifically supported so I used W25Q32FV instead. Attached is the dump from that read. Would someone please have a look a fix it for me? If I didnt read it right please let me know what I did incorrectly and I will sort it out ASAP. Thank you !

[Dawarr]

Re: Eeprom dump thread!

hi,

Medion/vestel
X14903
MD-32030
49"
BOARD: 17MB130P 23462734 ?V3(NOT SURE) ser.nr.7970800
PANEL: VES490QNDL-2D-N31 (LG32)
PS: 17ips72

hope u rescue me.
thank u in advance

greetz

[KYBOSH]

Re: Eeprom dump thread!

Got another one for you good people.
Samsung UN55HU8550
Bootloop at Startup "SmartTV" logo.

I found 2 chips but I am not sure which one is the firmware so Im including both.
Both were relatively close to the processor and both were marked with a marker at the factory.

Thank you in advance!

[lotas]

Re: Eeprom dump thread!

Got another one for you good people.
Samsung UN55HU8550
Bootloop at Startup "SmartTV" logo.


Thank you in advance!

If you have a bootloop, then the problem is in the eMMC firmware.

[KYBOSH]

Re: Eeprom dump thread!

You are amazing Sir.
Thank you for the knowledge.
I will proceed accordingly.

Any hope for the panel dump in Post #1412?

[lotas]

Re: Eeprom dump thread!

You are amazing Sir.
Thank you for the knowledge.
I will proceed accordingly.

Any hope for the panel dump in Post #1412?

What is this firmware from the panel bar from? If so, then I haven't encountered any problems with them.

[KYBOSH]

Re: Eeprom dump thread!

What is this firmware from the panel bar from? If so, then I haven't encountered any problems with them.

The dump is from the LCD Panel board of Samsung UN55MU800.
The display panel's number is CY-SM055FLLV6H.
The LCD panel board that this W25Q32JVIG resides on is BN96-41982A (see attached picture).

It is believed that there is an issue with it as the panel is not getting picture but the mainboard is believed to be good and there are no shorted components on the LCD panel board.

Thank you very much!

[lotas]

Re: Eeprom dump thread!

There is nothing special in it and does not affect the image (correction of broken pixels is set at the factory for each panel and the contents are different for them), the T-con firmware can be responsible for the image, it is located on the 25Q80 motherboard.

[KYBOSH]

Re: Eeprom dump thread!

There is nothing special in it and does not affect the image (correction of broken pixels is set at the factory for each panel and the contents are different for them), the T-con firmware can be responsible for the image, it is located on the 25Q80 motherboard.

I very much appreciate the guidance Lotas. It was suggested that this maybe a source of my No Picture problem.

Are you able to check my EEPROM dump in post #1414 to see if it is in order?
That would be another unknown i cam eliminate as a source of my issues.

[cheeky2]

Re: Eeprom dump thread!

I have this corrupted Blaupukt 32 147I-GB-5B-HBKUP-UK screen LVW320SSDX E2 V1 main TP.MSD309.BP85 C12415 that will not turn on could someone have a look at it for me and see where the corruption is please? I see Lotas has the relevant skills to do this.
I am going to try and work out how to do this in future so any tips would be appreciated in working it out as I try to understand and resolve problems myself.
Thanks

[lotas]

Re: Eeprom dump thread!

I have this corrupted Blaupukt 32 147I-GB-5B-HBKUP-UK screen LVW320SSDX E2 V1 main TP.MSD309.BP85 C12415 that will not turn on could someone have a look at it for me and see where the corruption is please? I see Lotas has the relevant skills to do this.
I am going to try and work out how to do this in future so any tips would be appreciated in working it out as I try to understand and resolve problems myself.
Thanks

Hello, there was no time, dump is ready (there was a problem in it), try it.

[cheeky2]

Re: Eeprom dump thread!

Hello, there was no time, dump is ready (there was a problem in it), try it.

Thanks Lotas. It will take a few days before I can try it. I will let you know how it goes when it's done.
Regards Anthony

[lotas]

Re: Eeprom dump thread!

Ok.

[luzmina]

Re: Eeprom dump thread!

I need bin file for TV Westinghouse Model: DWM32H1G1 using chip MSD3393LUM, attached is the broken bin file, Thanks

[lotas]

Re: Eeprom dump thread!

I need bin file for TV Westinghouse Model: DWM32H1G1 using chip MSD3393LUM, attached is the broken bin file, Thanks

What is the motherboard number?

[luzmina]

Re: Eeprom dump thread!

St3393lup-a1h