Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]

Announcement

Collapse
No announcement yet.

HP 17-cd0606ng no Windows or Linux Boot, exept idle=poll Boot-Parameter

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    HP 17-cd0606ng no Windows or Linux Boot, exept idle=poll Boot-Parameter

    Hello,

    this is a very strange Problem:

    Notebook hang instantly on Boot. BIOS is accesable.
    Windows: instant after showing "loading circle", even Windows Boot Stick hang instant (even without installed SSD/NVME )
    Linux: instantly (if Linux Boot in leagacy Mode with log messages: Machine Check exception after 0.25 sec)

    i have tried:
    - only one RAM Stick, another working RAM, both RAM channel
    - BIOS Flash to newest Version F.50, BIOS Reset
    - Memtest86 hang instant at Test 2
    - HP UEFI Diagnostic wont find any Errors
    - Error is persistent no matter conect/disconect internal Battery, Powerbrick or SSD/NVME
    - internal Voltages 12V, 5V, 3,3V, 1,2V RAM and CPU are OK

    The only Way to Boot is Linux Boot Parameter idle=poll

    If i boot with this Linux Parameter, the Machine is running rock solid.

    If i understand this parameter correctly, all internal power saving functions of the CPU are deactivated. I think that the CPU may be defective.
    The Error occured after some forced Shutdowns because the Cooling System was clogged.

    Anyone an Idea?

    Notebook Hardware:
    CPU: i5-9300H
    RAM: 2x8GB DDR4 Samsung SODIMM
    Mainboard: FPC70 LA-H472P

    #2
    Re: HP 17-cd0606ng no Windows or Linux Boot, exept idle=poll Boot-Parameter

    No ideas?

    Comment


      #3
      Re: HP 17-cd0606ng no Windows or Linux Boot, exept idle=poll Boot-Parameter

      what does linux verbose boot show without idle=poll arg?

      try reset NVRAM as well

      Comment


        #4
        Re: HP 17-cd0606ng no Windows or Linux Boot, exept idle=poll Boot-Parameter

        Originally posted by echow2001 View Post
        what does linux verbose boot show without idle=poll arg?...
        This Message:



        I only found a description for a BIOS Reset and a EC Reset (disconect Power Supply an press Power for x Seconds), not for NVRAM Reset.
        Attached Files

        Comment


          #5
          Re: HP 17-cd0606ng no Windows or Linux Boot, exept idle=poll Boot-Parameter

          I'm sorry, did you find a solution?
          I have the same problem, I think CPU is not good.

          Comment

          Working...
          X