Hello 
I have problem with my display. All analog inputs are ok. Problem is with DVI.
When I connect the cable, the monitor goes into sleep mode (amber LED). All insecure capacitors have been replaced. The voltages are normal. I found out that the EEPROM from the 24C02WP (U105 on logic board) system may be damaged, there are two of them, one next to DVI, the other next to D-SUB.
If anyone has a dump of this chip, please share.
Could it be from a different monitor?
Dell 2005FPW Monitor.
Image of logic board
https://ibb.co/SsMsNVd
I have problem with my display. All analog inputs are ok. Problem is with DVI.
When I connect the cable, the monitor goes into sleep mode (amber LED). All insecure capacitors have been replaced. The voltages are normal. I found out that the EEPROM from the 24C02WP (U105 on logic board) system may be damaged, there are two of them, one next to DVI, the other next to D-SUB.
If anyone has a dump of this chip, please share.
Could it be from a different monitor?
Dell 2005FPW Monitor.
Image of logic board
https://ibb.co/SsMsNVd