Are these right? When I plug HDMI cable from computer to TV I heard sound but no picture I touched white square resistor on Y sus board, it was bit warm..
The blinking rate I believe should be an equal on/off period which the video shows that it is not.
It looks as though it is blinking 1 long and 2 short blinks and then repeating.
Unfortunately although I know that the blink rate is wrong I don't know what it points towards. Perhaps someone else could offer advice.
The blinking rate I believe should be an equal on/off period which the video shows that it is not.
It looks as though it is blinking 1 long and 2 short blinks and then repeating.
Unfortunately although I know that the blink rate is wrong I don't know what it points towards. Perhaps someone else could offer advice.
Have you tested the Ybuffers?
Tested Y buffers for shorts yesterday. Now VA is stable 55v and VS 205v (adjusted trim).
But -VY and VSC voltage now changes strange and show unrealistic voltages, under 100v and over 200v (I have cheap multimeter). Maybe something causes ripple? Some capacitor?
Comment